Hold the trim plate against the wall and use the bubble level in the thermostat base to make sure everything is level. Your Nest thermostat gets used to the temperature and level of activity in one spot, so if you move it to a new spot or to another room it may not work as you expect. Moving your thermostat closer to the edge of a table is fine, but moving the stand across the room or to another room can confuse your thermostat. Pull the thermostat wires through the hole in the steel plate. Then secure the plate to the electrical box with two of the included short screws. You can install your Nest thermostat with a trim plate if your old thermostat left a large hole or unpainted part of the wall. The trim plate is optional. To install a Nest thermostat on an electrical junction box, use a metal plate and trim plate. Important things to know

Install your Nest thermostat - Google Nest Help Install your Nest thermostat - Google Nest Help

The Nest app will guide you through wiring for the Nest Thermostat E. Below is the wiring diagram for 3rd-gen Nest Learning Thermostats. If you’d like to install your Nest thermostat yourself, everything you need is included in the box: Important: Because your thermostat works best when it stays in one place, you shouldn’t move it after you’ve chosen a good spot. Features like automatic switching to Eco Temperature depend on your thermostat being able to get consistent temperature and activity readings from the same spot in your home. The Nest Thermostat E’s stand has an integrated power cable so it can’t be replaced separately, If you’ve misplaced or damaged the power adapter, you can use a USB charger for mobile phones or tablets that’s rated to deliver at least 5 VDC @ 5 Watts. Attach the plate to the wall with the included screws. The screws are self-tapping, there’s no need to drill holes.Nest Thermostat works with most 24 V heating and cooling systems, including furnaces, air conditioners, boilers and heat pumps with either forced-air or radiant delivery. The next thing you’ll have to do will depend on what you have in mind for the Nest thermostat. Homeowners who are looking to just reuse their Nest thermostat in the future can store it until the time to reinstall. To get a custom wiring diagram for installation, simply follow Nest app’s thermostat installation instructions. TheNest Thermostat E works with 85% of 24 V heating and cooling systems, including gas, electric, forced air, heat pump, radiant, oil, hot water, solar and geothermal.

Nest Thermostat - How-To Geek How to Install and Set Up the Nest Thermostat - How-To Geek

Turn off power to your system before exposing wires. This helps protect you and your system from damage. Important:The stand is different for the 2nd and 3rd gen Nest Learning Thermostats, and they are not interchangeable. To make sure you get the right stand for your thermostat, see the differences below. You don't have permission to access "http://www.homedepot.com/p/Google-Nest-Thermostat-Trim-Kit-Snow-GA01837-US/315040405" on this server. Note:Only one of the wires that go into theconnector (HUM,DEHUM,E,W 3) can be connected to the Nest Learning Thermostat.Smart thermostats such as the items in the Nest brand are becoming fixtures in more homes. It’s easy to understand why that’s happening given how convenient and user-friendly those thermostats are. Once you’ve set up your thermostat and connected it to the Nest app, follow the link below to learn about how to use your Nest thermostat. In most homes, installing a Google Nest thermostat is an easy DIY project that takes about 20-30 min. The Nest app’s step-by-step instructions make it easy to install and wire your thermostat, so use it as your main guide. Refer to this article if you need extra help.

Nest Thermostat Wall Plates - Etsy Nest Thermostat Wall Plates - Etsy

It is possible to convert to a low-voltage system if you have a high-voltage system, but it's pretty involved and takes a bit of know-how, so if you absolutely want to install a Nest Thermostat, it might be best to call a professional to convert your system. While in the Settings submenu, go all the way to the right until you find the option to reset the thermostat. Just keep swiping until you see it. Upon finding the reset button, press it and choose to reset “all settings.” You’ll be prompted for confirmation so go ahead and provide that. If you need to replace the power cable, you can use a standard micro USB cable for 3rd or 2nd gen Nest Learning Thermostats. Thread the power cable that came with your Nest Stand through the hole so that the small end of the cable comes out in the front. The app will show you how to install your thermostat. It will ask you some questions about your thermostat wires. Answer them as accurately as possible.

Pull the thermostat wires through the hole in the steel plate. Then secure the plate to the electrical box with two of the included long screws. Place your thermostat 0.75 to 1 m above the floor on a flat surface . If you place it too low, this can affect the temperature reading and run the system longer since it’s generally cooler closer to the floor.