The HEA paint sprayer is available in four variants in total, two lighter models and two heavier models with more power. The material used in the fabrication makes the difference distinct: two models have plastic (R) housings and two have metal (M) housings. Where consumers would consider using the plastic variants, the professional would probably go for the more robust metal machines.

Besides reducing overspray, Wagner HEA Control PRO gives you more control. Whereas you often had to overlap your strokes before, the softer spray fanning out of the HEA paint sprayer means you can avoid this. Your strokes will look smoother and neater, making it is easy to place them beside each other instead of having to (partially) overlap them. The “Wood&Metal” spray attachment is suitable for the application of primers, varnish, wood and metal paints. At the start of spraying, set the material volume to low and increase if necessary depending on your working speed. Spray as thinly as possible to avoid “streaks” and reduce drying times. HEA is a completely new technique developed by Wagner. It has all the features of Airless plus some HVLP features to combine the best of both worlds. Consider what and where you are spraying, e.g. if painting a roof you want the unit on the ground so will need a minimum of 15m, with a smaller hose you will need to be moving the spray unit around continuously.This new technology gives even better and fuller spray than Airless technology, currently the highest standard in the market. Thanks partly to the new technology, the machine can spray all the usual materials using less power, which makes it far more efficient than the predecessors. Combined with a new Wagner nozzle design and reduced working pressure, this Airless spray system offers maximum control and professional results without any streaking, making the Wagner Control Pro HEA 350 Extra not only easy to use, but also enables first-time users to achieve perfect results. It allows you to work with all water and solvent based paints, varnishes, wood stains and preservatives, as well as emulsion and latex paints. Thanks partly to the new technology, the machine can spray all the usual materials using less power, which makes it far more efficient than the predecessors. NOT Suitable for: Material that contain highly abrasive components, Facade Paint, Caustic Solutions and Acidic Coatings. This new technique provides an even better and fuller spray than current Airless machines, which currently represent the highest standard in the market. HEA combines the advantages of two existing technologies: HVLP and Airless.

As you can read in the Airless section, an Airless machine is suitable for spraying large surfaces, has a wide range of applications and provides a nice finish. However, an Airless sprayer produces relatively a lot of overspray, is harder to use, less forgiving, and makes quite a bit of noise. Power and flow rate translates directly into how hard your unit is going to work and will have an immediate effect on the longevity of your sprayer and the variety of products that can be used. HVLP, on the other hand, may offer a slightly less attractive spray pattern, but it is friendlier and easier to use, produces less overspray and is also suitable for a wide range of jobs. Better said: it is especially suitable for smaller areas and less intensive use. It is an ideal machine for consumers and DIY projects that need a bit more power to finish the job.

Can I use the Wagner HEA Control Pro 350 M and R on professional jobs?

In basic terms the spray tip is used to determine the size of the fan and the speed of the paint flow. A tip will have 3 numbers eg 515, the first number is the size of the fan (approx double and measured in inches), in this case the 5 means a 10 inch fan and the next 2 numbers are the size of the orifice. For the Control pros they start at a '11' this is the smallest going up to a '19' being the largest. You match the tip to the paint or area being painted, a 311 is great for small areas like window frames and furniture while a 619 is ideal for roofs and larger areas. The flexible Wagner HEA PRO 350M can handle a wide range of materials: From walls (including smooth masonry), ceilings, basements and garages, through woodworking and wood preservatives for log cabins, facade cladding or carports, to corrosion protection of steel beams. It can spray all common water-soluble and solvent-containing materials simply and professionally. The Control Pro 250 R is a compact airless paint sprayer with a carry handle, which is designed for experienced DIY'ers. It allows you to work with all solvent and water based paints, varnishes and wood preservatives as well as emulsion and latex paints. The Control Pro 250 R is from a completely new generation of Airless paint sprayers, which are equipped with High Efficiency Airless, or HEA technology. This is based on innovative nozzle technology combined with a highly efficient but pressure-reduced pump. The reduced spraying pressure allows simple and clean working with an Airless device, providing maximum control with up to 55% less overspray. Perfect, streak-free results are possible, even for first-time users. https://www.yss.co.uk/wp-content/uploads/2018/06/Yorkshire-Spray-Services-Ltd-Wagner-Control-Pro-350.mp4 The Wagner HEA PRO 250R is the ideal partner for medium-sized projects, such as new builds or home renovations. It is perfectly capable of spraying all current water- and solvent-based fluids and is specially developed for DIY, building managers and service providers who use spray painters on a regular basis. The model is handy to use, compact and easy to store. This paint sprayer has a plastic housing and is therefore lighter than the M variants.

HVLP, such as the Universal Sprayer series, for example, is easier to handle and gives less overspray The full range of spray painting tips, however, will remain useful especially because you want the best result. However, the new HEA tip has gone through revolutionary development. Thanks to the new tip technology in the HEA, Wagner has been able to reduce overspray by some 50%. Which means you can now work a lot cleaner (waste far less paint) and get even better results.High-Efficiency Airless Pump with Reduced Spraying Pressure –for maximum control, a longer service life and up to 55% less overspray Rupes Bigfoot Polishers - System Based Polishing Tool - Compound - PadI recently spent a morning wit No heavy lines – on the top and bottom of the spray pattern that novice and intermediate users get when spraying at higher pressures.

Also, they have paid due attention to the spray gun. Now it fits even better in your hand and has a more sensitive two-finger trigger. The whole gun is made of high quality metals. The number in the product name indicates the difference in power between both types of Wagner HEA sprayers: the 250 (= lighter model) and the 350 (= heavier model). Production – Same flow and production rate as higher pressure systems with adjustable pressure control for accurate setting and control.The Wagner HEA PRO 350M is the ideal partner for small to medium-scale professional projects for new builds, furniture production and renovations. This device is designed for water and solvent based paints. Suitable for: Dispersion and Latex paints for interior use. Water & Solvent based material, Oils, Release Agents, Synthetic Enamels, PVC Lacquers, Undercoats, Base Coats, Fillers and Anti Rust paints. The lower pressure also supports effortless operation with the high-quality Airless gun, which features significantly reduced trigger pressure and recoil compared to conventional airless sprayers. Longer Equipment Life– The lower spraying pressure of the high efficiency airless puts less stress on the system, which in turn Increases tip and pump life.