Enter the new code or present a tag. Once ‘asterisks’ appear, the tag or user code will be now assigned to this user. Press . The control panel may be transmitting data to the PyronixCloud, wait a few seconds then try again. If the problem persists the panel may have lost connection to the Cloud, perhaps the internet connection is down. If the system is connected via Wi-Fi, the panel may have disconnected from the Wi-Fi network or the signal strength is too weak. If an invalid tag is presented 6 times without a valid tag presented, the respective keypad or reader will be disabled for 90 seconds. After reinstatement, this state will be repeated after 2 invalid tags are presented to any reader.

Advanced technology preserves the battery life of each wireless device. However, the system informs you when a battery needs replacing up to a month in advance before the device stops working. This key feature gives you enough time to change the battery in the specific device. Conventional wireless alarm systems may not give you a low battery warning signal, meaning that devices could stop working, leaving your environment unprotected. The fully two way wireless keyfob allows you to see the status of the control unit via three colour LEDs: Compliant operation is only guaranteed when installed and operated according to the relevant installation and user manuals. HomeControl2.0 also delivers voice notifications alongside the push notifications simultaneously to make sure you never miss an incident, whether this be your alarm disarming, perimeter breached or panic alarm you will be the first to know.If you have changed your broadband provider and have a new router, the control panel will need reconnecting to the router with the new Wi-Fi credentials. If you have not changed your router try resetting it, this often fixes connection problems. If you have changed the router, or resetting the router does not work, follow the instructions in the video below to re-establish a connection. The ‘EDIT USERS’ function allows adding, editing and deleting of user codes, tags and key fobs. The Master Manager Code can also be changed. The control panel can have up to 75 users. After 30 key presses without entering a valid code, keys are disabled for 90 seconds. After reinstatement, this will be repeated after each 7 key presses until a valid code is entered.

There isalso the option to have different functions per key fob so you don’t have to give access to the whole property. This makes them ideal if you want to give someoneaccess to certain areas of the property whilst restricting others. When an area or level is armed, if an zone is triggered, the system will follow the appropriate (programmable) actions. This alarm system has been engineered to be secure, reliable and easy to use. It includes the following features: Alarm activation: Notification that the alarm has been triggered, allowing you to monitor your home from anywhere in the world. Please note: The Master Manager code allows access to all the options above. A ‘user code’ has access to the ‘User Menu’ which includes the functions: ‘OPERATE USER OUTPUTS’, ‘CHANGE CODE’, ‘REVIEW LOGS’, ‘WALK TEST’, ‘SIREN TEST’, ‘ALLOW ENGINEER MENU’, and ‘EXIT USER MENU’.

INTRUDER ALARM KITS

There is also the option to have different functions per keyfob so you don’t have to give access to the whole property making they ideal if you want to give someone access to certain areas areas of the property whilst restricting others. For example if you would like your gardener to have access to the garage but not the rest of the house you can set it so he can only unset the alarm from that area. With the KEYFOB-WE Pyronix key fob you can program wired automation such as blinds, gated or garage doors which can trigger at the push of a button. An output is a signal from the panel to instruct another device to operate. This is usually a voltage that triggers a wired siren, a garage door, a wireless siren etc. Receive notice via SMS text message or push notification of any incidents within your home in real time. This can be programmed to send in different situations such as: For example, the DIGI-Wi-Fi module this must first be connected to an available Wi-Fi network. Please see the video here ( https://bit.ly/2UWy5SB) for a tutorial regarding DIGI-Wi-Fi programming.

Your panel is designed to automatically inhibit certain functionality. The factory default settings are shown below: Button 8 Function Keyfob with Enforcer Two-Way Wireless Technology. The 4 buttons can be configured for single buttons and combining 2 buttons. Please note: This menu will only be visible with a ProControl+ compatible module installed. Press or to scroll to ‘SET UP APP DATA’. Press .The act of stopping an zone from becoming armed. A wired zone will still detect an intruder or object but the system will not react to it – a wireless zone will become dormant. A warning device (usually external) that is generally configurated to give audible and visual notification that the system has been activated.