The needle bar should be oiled every time you change your needle and also when the machine is first put into use. Some manufacturers recommend cleaning the machine after every 10 hours you use it. Clean it when you see lint starting to gather. Some older machines mark the spots where you should drop oil in red. Others tell you where to drop it using pictures to guide you.

It is always better to be safe than sorry, especially when you are paying a lot of money for a Bernina sewing machine. Cleaning and Oiling a Bernina With a CB Hook Oiling your sewing machine is an important part of maintenance that can help keep it running smoothly and extend its lifespan. The best thing about this product is the telescoping spout that lets you get the applicator into really tight, hard-to-reach places. Believe it or not, the spout gives you about eight-inches of length, which makes it really easy to get oil just about anywhere without any leaks. Plus, the flow is easy to control so you can also be sure you’re using just the right amount of oil with each appUse a lint brush to gently remove any dust or lint from the machine’s exterior. Be sure to get into all the nooks and crannies. Of course, there is some flexibility here as your machine may not need oiling if your project is small and does not take a lot of time to complete. You would have to be the judge of that. But you should not let a lot of time or a lot of small projects delay your oiling time. Yes and no, as mineral oil is one of those petrochemicals used by sewing machine oil manufacturers to create their sewing machine oil. It is said that white mineral oil can replace sewing machine oil because of its similarities. This is a special oil that is designed to be used to keep your sewing machine working like it was advertised. Whether you have an antique, a vintage, or a computerized sewing machine only a few drops, not more than 2 or 3, will keep your sewing machine running at optimum levels. Oiling a Brother sewing machine is a simple and important maintenance task that can help ensure that your machine runs smoothly and efficiently. Proper lubrication of the various moving parts of the machine, such as the gears, bearings, and needle bar, can help reduce friction and wear, and prevent problems such as skipping stitches and jamming.

Synthetic oils like this product outperform all the other petroleum-based machine oils on the market. It eliminates friction between the metal parts of your sewing machine and any other household appliances. The oil is safe on plastic and other surfaces. It's simple: always just a drop or two per spot. It will be enough. Don't use too much oil because it can cause problems. It can drip on the fabric as you sew, and nobody wants that. Also, too much oil will attract more dust. If you have used too much oil, use a dry cloth to rub away the excess carefully and gently. I don't have my machine manual.It’s important to use the original oil recommended by the manufacturer. Using the wrong type of oil can damage your machine and void your warranty. Look for a resin-free and acid-free oil to prevent buildup and corrosion. Magnetically charged oil can also help attract and remove metal debris from your machine.