The attached video was taken after two previous model prints had been done in exactly the same place and the original Magigoo coating still in place.

Ideal settings may vary depending on the 3D printer being used, heated bed technology, plastic brand and even the environment you are printing in. So after repeated failing PETG prints, (somehow not sticking to bed) nomatter what settings I tried I bit the bullet and bought some magigoo.Warping, among other factors, is caused by the differential cooling of a print during a 3D printing process. Is ideal for technical materials such as PET-G and ABS because these materials tend to have more warping.

Magigoo PP offers a strong and convenient bonding surface for PP materials without the need to apply tapes or other coatings to the printing surface. layer height and I need to increase bed temperature to 95C; printing Rigid Ink PLA and I can get away with a 40C bed temperature irrespective of layer-height! Our goal continues to be to make the most innovative filaments on the market, targeting difficult end-use applications where functionality is king.

But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a. Warping happens because of the properties of the plastic and some of them tend to shrink when cooling down fast.

The Magigoo 3D Printing Adhesive is odourless, non-toxic, long lasting, easy to apply and features an incredible 'easy release mechanism'.

Thanks to the Magigoo PP this problem has disappeared, the application of this liquid adhesive in combination with the hot base, ensure a 3D printing without warping problems. For printing repeatedly and reliably remember to apply Magigoo Pro Flex on your print bed before printing in flexible filaments. Our courses are designed to take you from complete novice to an expert user of 3D Printers, 3D Scanners, Software and materials.

Nonetheless when using these solutions some difficulties are still encountered, firstly with adhesion especially on larger parts still can be an issue. To solve this problem, Magigoo has developed a tool: the Magigoo applicator, which works with the new 250 mL format of Magigoo adhesive. Magigoo PRO PPGF is the stronger cousin of Magigoo PP, offering stronger adhesion for the stiffer reinforced polypropylene blends. Bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if bigger flow is required. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.After the it has been applied it should be left to dry before 3D printing is started, it is also recommended that after each 3D print the plate is cleaned and applied with a new coat of Magigoo.