Once you have connected your Bluetooth receiver to your speakers, you have finished the hard part. Now you will need to pair your device with the Bluetooth receiver. First, turn on your Bluetooth receiver. If you have powered speakers, plug them in after turning on your Bluetooth receiver. You have come to appreciate the freedom a pair of Bluetooth headphones, connected wirelessly to your smartphone or laptop computer, has to offer. Bluetooth is a wireless protocol that transfer a music signal wirelessly from the music source to wireless speakers or wireless headphones. Select the Bluetooth adapter to initiate the pairing process. The device will send a pairing request to the Bluetooth adapter, and you may be prompted to enter a PIN code. Consult the Bluetooth adapter’s user manual for the default PIN code, or use any PIN code recommended by the manufacturer. Find the list of paired devices and locate the paired Bluetooth adapter or the name you assigned to your RCA projector.

To ensure the best audio experience, we also covered the adjustment of Bluetooth settings on your device, allowing you to fine-tune audio quality and ensure a stable connection. Finally, we emphasized the importance of testing the connection and troubleshooting any issues that may arise.Systems like Apple Airplay and Sonos use the WiFi protocol to transfer the music signal. And not Bluetooth. Tap on the name of the paired device to access its specific Bluetooth settings. Here are some settings you may want to consider adjusting: If your A/V receiver doesn’t have an HT Bypass or Direct In, you can still hook it up to an empty audio channel. This will likely make the audio very low when your Bluetooth device is at a normal volume. Use the Bluetooth device to control the volume so that you don’t disrupt the volume settings for your other devices. RCA and Aux Connections

Admittedly, Sennheiser can’t pretend the TV Clear is an entirely new concept — wireless TV headphones have existed for over a decade now — but Sennheiser is promising better customization options via the app, lower latency, multi-point pairing and a more approachable design that most folks are more familiar with. Plug the Bluetooth adapter into the audio output port of your RCA projector. Ensure a secure and snug connection. If the adapter uses RCA ports, match the colors (red to red, white to white). After connecting the adapter to the turntable (or preamp), you will need to pair the adapter and your wireless speakers. The adapter has a switch where you can choose between transmitter (TX) mode and receiver (RX) mode, so you can buy two similar adapters and make the whole system wireless by connecting one adapter to each end. End note For instance, if the sound from your TV isn't loud enough, you can use one to connect a wireless speaker. Or if you want to watch TV late at night without disturbing others, you can pair a Bluetooth TV adapter with some headphones and keep the sound to yourself.

Step 1: Check for Bluetooth Capability

So you have a set of wired speakers you want to make Bluetooth compatible? It can be a pretty straightforward project that will save you on a set of comparable Bluetooth speakers. What?s more, the Marmitek BoomBoom 55 Bluetooth transmitter can be simultaneously associated with two pairs of wireless Bluetooth headphones. Practical for listening to a program with a friend without bothering those around you.

There are several Bluetooth adapters to choose from. The important thing to consider is that the one we choose has analog inputs and support the aptX Bluetooth protocol for the highest quality sound. Strip off a small amount of the outer tubing to expose the two wires inside. Strip a small amount of tubing off of each wire and plug one into the positive terminal and one into the negative terminal. Ensure the audio output is set to the Bluetooth device you paired with the RCA projector. Some devices may offer an option to select the audio output device within the media app itself.

Conclusion

You may want to be able to send audio to two headphones or speakers at the same time if you’re watching TV with a friend. If you plan use it as a receiver or if you need to use it on more than one TV,a battery will come in handy. The size of the unit can also come into play if you plan to move it around or you don’t want it to be obvious. Best Bluetooth TV adapter alternatives Ideally, these internal wires will be color-coded in accordance with the speaker clips. However, if they are unlabelled, it should not make too much of a difference, since audio signals are alternating current. On the device you want to connect wirelessly to the RCA projector, such as a smartphone or tablet, navigate to the Bluetooth settings. If your TV has an optical digital audio output and you don’t need the latest Bluetooth standard, the Mee Audio Connect AF-T1 could be a good match for your Bluetooth TV adapter needs. In addition to optical digital, the Connect AF-T1 also has a 3.5mm input and comes with a splitter to hook to an RCA output. At 2.2 x 2.2 x 1 inches, it’s small enough to take with you and features 12 hours of battery life. You can connect two devices at once to listen with a friend.

By connecting the Bluetooth adapter to your RCA projector, you have taken a significant step towards enjoying a wireless audio experience. In the next step, we will discuss how to turn on Bluetooth and pair your projector with your desired devices. Keep in mind that the pairing process may vary slightly depending on the device you are using. Refer to the device’s user manual or online resources for specific instructions on how to pair it with a Bluetooth device.You should also think about the range: how far away will you be when you’re watching or listening? For TV watching, the range shouldn’t be much of an issue, but if you’re using the adapter to listen to music —or you’re sending audio from your phone to play over the adapter —you will likely want more range. Hook up the left channel to the positive terminal on one speaker and the right channel to the positive speaker of the other speaker. Then hook up one of each of the ground extensions to the negative terminal of each speaker. Pair with Bluetooth Receiver