You can manually install some of these, but it takes more time, and unless you are very limited with what you can take, a drill is well and truly worth throwing in. Screw in tent pegs are great for regular sand, really soft sand and loose earth, and for your standard camp ground earth. Look for areas where the ground might be slightly softer, like near vegetation or under fallen leaves. There are many different types of shaped pegs from different brands. They vary slightly in length and girth, with different design features too, but mostly they are pretty comparable – with just a few grams or millimetres difference between them. Tent Peg Features

If you’ve not used them before, know that everyone who has them raves about them, for good reason. Over the years, camping has become so much easier, and more comfortable, and little inventions like this go a long way to making this happen. If you're off camping, you'll need some camping equipment to help you along the way - read our buyer's guide to find out more.This minimalist design is best for those seeking to shave the most weight while still anchoring their tent or tarp From ultralight titanium pegs to super-strong aluminium stakes, here are the best tent pegs for your camping adventures.

To install them, just use the drill to wind the screw into the ground, at a 45 degree angle, or a little more vertical and hook what you need onto them. After several years of using these, I finally broke a couple. The first one snapped from too much torque on the drill, trying to go into seriously hard ground, and it basically just twisted the steel off. One of the best features of the pegs is the bag they’re supplied in. Double-lined for strength and durability, it has an oversized opening to easily move and replace the pegs and tools. This is because longer pegs can dig deeper into the ground. This, in turn, means that your pegs will offer a more stable hold on your tents. Typically, screw-shaped tent pegs are known to have a large surface area. This makes them useful for surfaces such as sandy or snowy environments. Therefore, screw-shaped tent pegs are ideal for environments such as the beach, desert, or snow-filled winter outdoors. Yet, you have to remember that with a higher surface area and length, your tent pegs will be heavier.Depending on the height, V tent pegs are a more versatile type. This is because they work great for all ground types. Typically, V tent pegs are ideal for the more crucial parts of the tent such as the main pegging points – four corners and main guyline. Due to their design, V tent pegs also deliver great strength to your tent. Your tent must be secured strongly enough to withstand the roughest conditions such as howling wind and driving rain. You may also be camping on a hard pitch with gravel or stones, and require the best tent pegs for the job of pegging out. A 13mm magnetic bolt head adaptor is also included. The bolt head adaptor can be used to screw the tents into harder ground and easily extract them using a power drill or driver. Be prepared for your camping trip to the great outdoors or festival with our guide on what to take. Shaped pegs – these pegs often have a V-shaped or Y-shaped design, created to provide a greater surface area for gripping into the ground, as well as easier penetration into soil

Instead of trying to force the peg straight down, try wiggling and twisting it as you apply pressure. This can help the peg find a path through the hard ground. Getting tent pegs into hard ground can be a challenge, but there are several techniques and tools that can help: Screw In Pegs are a galvanised 200mm-long shaft that accepts an included 5mm hexagonal driver, and both standard drills and impact drivers for great drilling forces. While looking a little agricultural, the cleverly designed wires loop and hook remains on the peg shaft and can be used to attach a guy rope, or to hold a tarp down directly to the ground. A great design idea sees the hook pointing downwards so as not to promote toe-stubbing. Although the Screw In Peg performed faultlessly in harder soils, the performance in anything softer is not much different to a standard peg. The finer flutes on the shaft clogged with dirt, rendering it of little use for ground-holding ability. The MSR Mini Groundhog (left, the size of a pencil) and Toaks Titanium (right, nested together) are both lightweight and portable options.Consider using heavy-duty or specialized pegs designed for hard ground conditions. These may have more robust designs or special features to help them penetrate tough soil.