I’m going to run a 300 foot Ethernet cable from my motorhome to the roof of my bosses office and plug it into a special Wi-Fi range extender in repeater mode. For instance, over 50 metres, it can support up to 40Gbps and over 15 metres, the cable has produced result of 100Gbps. This will result is in the system running at its old speed until the client upgrades the hardware or patch leads. If GG45 or ARJ45 (or something else) ever catch on, I'd re-terminate my wall jacks and patch panels at that time.

Its stable and fast network transmission performance meets the high network speed requirements of video games, online offices, teleconferences, data rooms, etc. Though Cat 7 cables have been shown to be capable of delivering such bandwidths, they only support frequencies up to 600MHz, so lack that official support for such high bandwidths. Where you see Ethernet cable labelled as either Cat7(a) STP or FTP, these acronyms stand for Shielded Twisted Pair or Foiled Twisted Pair respectively, and they essentially mean the same thing. Cat7 cabling standards were ratified in 2002 to allow 10 Gigabit Ethernet over 100 m of copper cabling. The neck part that is supposed to connect to the shielding is too small and doesn't provide any support and cannot be secured properly.

Originally ratified as a standard in 2002 , Cat7 was the first Ethernet cable type to offer speeds up to 10 Gbps over up to 100 meters of copper cabling.

This product includes a CAT7 Connector (with Insert) used with 22AWG thru 24AWG CAT6e / CAT7 UTP or STP Networking cables. When combined with GG45 or TERA connectors, Cat7 cable is rated for transmission frequencies of up to 600 MHz, featuring even more strict specifications for crosstalk and system noise than Cat6. If your hardware is outdated and doesn’t have the capacity to handle the speeds delivered by Cat7 cables, the performance of your system will remain the same. Cat7 has been designed as a standard for Gigabit Ethernet over 100m of copper cabling The cable contains four twisted copper wire pairs, just like the earlier standards.When purchasing a SUPRA product, a user guide or instruction is usually provided in the following languages: English. I've got cat7 through the house which came with RJ45 connectors, which was necessary at the time because of less than ideal router location requirments and distance. These do not provide speeds higher than would be expected of Cat 6a, and are a bit more expensive, but at least I can use the cable without paying 30€ a time for TERA connectors or having to bodge the whole thing by stripping the internal wires.

UPDATE: Ok, I have used the standard RJ45 terminators and these have allowed me to use the cable although, as predicted, I have not seen a clearly higher performance in cat 7 over cat 6/6a.With a millisecond of lag often meaning life or death in the gaming world, you may be wondering what are the best Ethernet cables for gaming? This lack of approval and the use of the alternative connector means that networking hardware developers have focused their support for 10Gb Ethernet for the RJ-45 connector, leaving the GG45 and TERA connection options underdeveloped. In this scenario, two wiring schemes (T568A and T568B) are used to terminate the ends of the twisted copper pairs found inside the jacketing of a Cat7 cable onto the RJ45 connector interface. This can include anything from temperature extremes and UV/moisture exposure, to direct contact with a wide range of solvents, oils and chemicals, making Cat7 wire an equally ideal choice for robust outdoor applications such as railway cables. Today, a highly diverse range of commercial and industrial sectors are showing increased demand for faster internet and data transfer speeds - a modern reflection of the fact that we’re continually finding ways to capitalise on the hyper-efficient capabilities of our cutting edge technology.