Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This scan tool covers over 20 years of models, so some functions may not be available on all years/models. I have RSW Solutions (4dcan I think) but it needs a laptop so not really something you can leave in the glove box! Steering Angle Sensor (SAS) Calibration : Calibrate the steering wheel to its straight-ahead position or recalibrate after steering part replacement. Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module.

iCarsoft V3.0 Diagnostic Tools | Genuine iCarsoft UK Outlet iCarsoft V3.0 Diagnostic Tools | Genuine iCarsoft UK Outlet

TPMS service functions include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement IDs, and testing sensors. Logs have been sent off to iCarSoft so hopefully they will fix it, but at this time I cannot recommend the LR V3. Required when the DPF Filter reaches levels where passive or active regeneration is unable to burn off the excess soot. Evap System Test| The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. I have an Ennova code reader that links up just fine and this is how I learned about the P1000 code.Please find attached your club label – please can this be distributed amongst your club members prior to the event. I can also use it on my Disco and then as a basic scanner on other makes of car, very good on a couple of Fords a couple of years ago.

iCarsoft Technology Inc. iCarsoft Technology Inc.

Air Suspension, Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off. At 72 I am not "over tech gifted" and am finding the User manual I had to print from the internet is not really that helpful to me.This proves that if something on the SCP bus is upsetting the tool then it stops the tool from working on the canbus. I then swapped all 4 sensors and now the red light immediately comes on and the compressor doesn’t even come on at all. After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.

iCarsoft Technology Inc. User Manual Downloading-iCarsoft Technology Inc.

In addition, we offer you EXCLUSIVE FREE LIFETIME Genuine Software Updates and Support - NO VIN/SOFTWARE RESTRICTIONS - can be used on as many vehicles as you like! prior to the height Sensor swap everything worked but the sensors where all over the place back was higher than front and left to right was off.Please make sure you have your ticket printed or available on your phone, ready to be scanned on arrival. Diesel Particulate Filter (DPF) Regeneration Control : Request DPF regeneration processes and turn off DPF indicators. BCM (Body Stability), This function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit. Ive had mine icarsoft CR Pro about a year and half, it covers all manufacturers and it came with lifetime up dates, you just remove the sd card, plug it into your pc and run the iCarsoft MSDIAG PCClientKits and it updates. The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is turned.

iCarsoft V3.0 Series | iCarsoft.EU iCarsoft V3.0 Series | iCarsoft.EU

This is the solution at amazing value for money - enabling technicians to accurately diagnose complex problems and now enables you to easily do the same.

Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.