While this machine is clearly designed with youngsters at heart, we can imagine older players playing at least one game with it. It will, however, need three D batteries to operate, so keep that in mind. For Y-Axis, the Limit Switches are mounted in the X Channel Plate and when X Channel Plate goes near the Frame, the limit switch is pressed and motion stops. We will be using Acrylic Sheet for making the Acrylic Parts for various applications in the Claw Machine. We will cut the sheet using laser cutting machines. In real the circuit is very dense and messy, hence we used some wire management in the upper part of the claw machine.

Crane Vending Machines | Claw Vending Machines Crane Vending Machines | Claw Vending Machines

Mount the Right Middle SIde Plate and the Right Bottom Side Plate on the right side of the Claw Machine. In terms of downsizing heavy machines into smaller counterparts, quality might suffer significantly. However, with this classic-influenced mini claw machine, this is not a problem.The user can start the game by inserting a coin into the coin machine. After inserting the coin, the user gets 2 min time to control the gripper, catch as many candies and drop them into the left corner from where the user gets the candy out. For X-Axis, the Limit Switches are mounted in on the Gripper Plate, and when Gripper Plate goes near the Shaft Support Holders, the limit switch is pressed and motion stops. RGB LED Strip Mount the Stepper Motor in the Y Channel Stepper holder and mount it on one of the sides of the top frame as shown in the figure below. Also, mount the flexible coupler on the stepper motor shaft. Although claw game machines may appear to be identical, you have some options to limit down your choices for the right present for your kid. When searching for the tons of mini claw games accessible to you, keep the following points in mind: The Child Age Take the 2 bearing holders for the motor plate and glue both on the surface of the linear bearing as shown in the figure.

Candy Claw Machine - STEMpedia Projects DIY Candy Claw Machine - STEMpedia Projects

If the product has a completely PVC-free tag or ASTM International marking, particularly code F963, it means it comes with some measure of safety. This number indicates that the toy complies with US safety regulations. Lights and Sounds There is a limit switch on the top of the Gripper which prevents motor motion when gripper comes close to the Motor. Mount the Left Middle SIde Plate and the Left Bottom Side Plate on the left side of the Claw Machine.

The RGB LED Strip is mounted on the inner parameter of the top frame using Glue or Double Sided Tape. The wire is extended to reach the Bottom of the Claw Machine. Attach thread on the top plate of the gripper and the other end to the pulley as shown in the figure.