Waterproofing kitchen walls and floors and work tops before laying ceramic tiles and natural stone. Mapegum WPS is a ready-to-use, solvent-free, one-component, grey-coloured paste with a base of synthetic resins in water dispersion. Mapei Mapegum WPS is a flexible liquid waterproofer suitable for waterproofing walls and floors in bathrooms and wet rooms. Use with Mapei Mapeband to provide further reinforcement on junctions and corners. Mapegum WPS is resistant to water, limewater (pH > 12), and water that contains chlorides, and normal household detergents and cleaning products.

Kenhető vízszigetelés víznyomásnak és állandó vízhatásnak nem kitett beltéri felületekre. A Mapegum WPS bármely felületen, például gipszkarton falak, gipszvagy cementkötésű vakolatok, pórusbeton, fa, meglévő kerámia burkolólapok, cementkötésű és anhidrid aljzatok, fa aljzatok, magnezit, melegen hengerelt aszfalt, stb. használható. Vízszigetelés fürdőszoba és zuhanyzó falakhoz és padlókhoz, kerámia burkolólapok és természetes kőlapok fektetése előtt; konyhák falainak, padlóinak és pultjainak vízszigetelése kerámia burkolólapok fektetése előtt. Megjegyzés: a Mapegum WPS-t az alábbi intézmények, mint nedves környezetben, burkolat alatt használható vízszigetelő anyagot minősítették: – Säurefliesner (Németország): tesztelve a jelenlegi szabványoknak megfelelően. – SP Svéd Nemzeti Tesztelő és Kutató Intézet (Svédország): tesztelve a jelenlegi BKR szabályoknak megfelelően (Building Ceramics Council). – Norvég Építőipari Kutató Intézet: tesztelve a jelenlegi szabályoknak megfelelően.Datorita elasticitatii hidroizolatiei,produsul suporta miscarile de dilatatie sau contractienormale ale suportului datorate diferentelor detemperatura sau vibratiilor. Odata aplicat si intarit, fiind un materialelastic, Mapegum WPSse poate utiliza si ca membrana antifisuraaplicata pe un suport cu microfisuri < 1 mm (se aplica castrat intermediar armat cu plasa de fibra de sticla, intresuportul cu fisuri si placajul ceramic montat cu adeziv). Dupa uscare, stratul de Mapegum WPS este rezistent la apa, apa calcaroasa (pH >12), apa cu clor sau apa care poate contine diferiti detergenti de uz casnic. After 12-24 hours from application of the final coat, the surface will be ready for laying ceramic tiles/natural stone, etc. Use an adhesive from the MAPEI range to lay these. Tiles may be fixed using a suitable Mapei adhesive from 24 hours after application of the waterproof membrane. From our carrier you will receive a text message on the day of the delivery with a 2 hour delivery window. If there any changes or delays you will receive an update via text. This fast-drying liquid membrane is for the interior waterproofing of the bathroom and shower walls as well as the countertops before installing ceramic tiles.

Mapegum WPS may be applied by trowel, roller, brush or spray. It must be applied evenly, in thin coats of approx. 1 mm each. Wait until the first coat is dry before re-applying. Drying time is roughly 1-2 hours. Waterproofing walls and floors in bathrooms and shower cubilces before laying ceramic tiles, natural stone and mosaic.

Thoroughly degrease the edges to be waterproofed with a suitable solvent such as acetone. Lightly abrade the contract area and wipe again with the solvent. Do not prime the GRP surfaces. Mapei Mapegum WPS is a ready-to-use, solvent-free, one-component, grey-coloured paste with a base of synthetic resins in water dispersion. It has a thixotropic consistency which makes it easy to apply on horizontal, sloping and vertical surfaces. You must be available to accept delivery on the date you have requested, failure to do so will result in paying for a re delivery charge.

And that’s it! Your shower is now fully waterproof. Of course, our reps are always on hand to answer any further questions you may have. Waterproofing indoor floor and wall surfaces that are not subject to rising damp. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Felhasználásra kész előkevert gyorsszáradású (4 nap) normál kötésidejű szárazhabarcs zsugorodáskompenzált esztrichek készítéséhez. Waterproofing walls and floors in bathrooms and shower cubilces before laying ceramic tiles, natural stone and mosaicMapegum WPS is a liquid waterproofing membrane for interior surfaces. Not suitable for continual immersion in water or areas that are subject to rising damp.

Solutia se gaseste gata preparata, avand o aplicare rapida si proprietati foarte bune de alungire. Nu necesita armare iar imbracamintile de pardoseli pot fi instalate dupa doar 12 ore. Este tixotropica, putand fi aplicata usor pe suprafete orizontale sau inclinate/verticale. Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE. If your next project involves installing a shower and making sure it’s totally waterproof, then my post today should help you to achieve it. We recommend using the Mapei Shower Proofing Kit to make the job a lot easier and following the steps below will ensure a totally water-proof area that should last for many years. Membrana finala este elastica, nelipicioasa, rezistenta la trafic pietonal lejer, care suporta miscarile de dilatatie si contractie normale. Permite montarea ulterioara a placilor ceramice, utilizand adezivi pe baza de ciment sau adezivi in dispersie. Mapegum WPS este o pasta monocomponenta de culoare gri, pe baza de rasini sintetice in dispersie apoasa, datorita consistentei si tixotropiei, se aplica usor atat pe suprafetele orizontale, cat si inclinate sau verticale. Dupa evaporarea apei din materialul aplicat, Mapegum WPS se transforma intr-o membrana elastica, nelipicioasa, rezistenta la un trafic pietonal lejer, pe care se pot monta cu adezivi adecvati placi ceramice sau placi din piatra naturala.

Kiemelt ajánlatunk

Säurefliesner (Saksa) testattu voimassaolevien standardien mukaisesti. Tekniset tiedot: Pinnan muodostus: 1 h Mapei Mapegum WPS is for waterproofing indoor floor and wall surfaces that are not subject to rising damp nor in permanent water immersion. It is ready to use, can be applied rapidly and floor coverings can be applied after just 12 hours. Systems based on the use of Mapei Mapegum WPS, on which various types of tiles have been laid using MAPEI cementitious-based adhesives (such as Granirapid, Keraflex and Adesilex P9) and water dispersion adhesives (Ultramastic III), have been certified for use in damp environments by the following institutes: – Säurefliesner (Germany);