Any unused Joint-It Simple should be put into the cleaned empty bucket (first having removed the plastic bag and cardboard from the bottom of the bucket) and covered with at least 2 inches of clean water.

Not using enough water on the paving, especially in warm weather, dries out the product too quickly before it has been brushed into the joints. I have no complaint against the product whatsoever and I have spoken to someone from the seller who was extremely helpful. However, the terms mortar and grout are commonly used to describe many ready-mixed paving jointing products, including our unique Joint-It Simple. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. We also sell power tools such as the ‘Grabo’ vacuum suction cup lifter which lifts tiles, slabs, paving, glass, concrete, drywall, plywood, furniture, timber and grabs rough, porous and even wet surfaces.Versatile: Suitable for a variety of paved surfaces, from stone, porcelain to manmade – Joint-It Simple is ideal for patios, driveways, or garden pathways. All you need to get started is a hard and soft brush, clean water, and a bucket of Joint-It Simple Brush-in Paving Jointing Mortar. Please let us know if you’ve got any more questions about Joint-It, or any of our other products and services. Using this sealant can help prevent flooding and reduce the amount of water that enters our rivers and streams.

With minimum effort and maximum results, you need hard and soft broom water, preferably a hose and a tub of Joint It simple. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. Because Porcelain is a smoother stone it doesn’t absorb water to the same degree as other natural stone products. At an average temperature of around 20° Celsius, Joint-It Simple should feel hard-to-touch after approximately 4 hours. I've used joint-it simple on numerous patio's now from sandstone to limestone to porcelain and I find it a fantastic product.Because Joint-It Simple is activated when it comes into contact with air, the product hardens more quickly in warmer climates.

This product is water permeable, allowing rain to seep into the ground rather than pool on the surface. Joint it does not leach and is non-staining, so it is safe for natural stone, but limestone and honed black granite should be pre-sealed before pointing with Joint it simple.

before you tip out the product, otherwise Joint-It Simple may accentuate any natural discoloration in your paving slabs.

All outdoor surfaces require some maintenance when exposed to the changing weather conditions and foot/vehicle traffic. Joint-It is a simple to use, brush in jointing grout that helps you get the job finished faster, and ensures that it stands the test of time. Joint-It Simple – is a ready-mixed, permeable, jointing compound that can be applied in all weathers.Space must be left to allow for 50mm / 2” (inches) of sand and cement and the depth of your paving slab to sit on top of the foundation.