Multi-function jig for accurately fitting kitchen worktops in 10 different widths from 250mm to 700mm wide.

Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths, cuts any sized joint Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm. 650mm and 700mm wide worktops. To maximise the potential of the router, we offer a range of accessories for the professional user and craftsperson. ADAPTABLE MODULAR JIG Can be built to different sizes as required, allowing access where there is work space limitations

FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non standard width worktops Trend is always developing new and innovative time saving solutions for our tradespeople throughout the world. Left and right hand corners, 400mm radius peninsular joint, 45� end cut with slight radius, 45� trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up DIFFERENT JIG OPTIONS 660mm long (500mm maximum joint length) for narrow bathroom vanity tops, 990mm long (750mm maximum joint length) standard kitchen worktop installations and 1190mm long (900mm maximum joint length) for wider breakfast bars and peninsular joints and standalone connector bolt, hinge and tap hole jig