This makes it great for use in hygienic areas where it may be repeatedly cleaned, and it is also approved for food contact. Cast acrylic is one of the hardest thermoplastic sheet materials available and its attractive aesthetics remain for longer than other plastic sheet materials. Unlock your creativity and bring your artistic visions to life with Cast Clear, the ultimate clear casting resin. On some fine lawns, such as that which is low cut for sport, and gravel paths worm casts may be considered undesirable by some gardeners. Perspex ® clear cast acrylic is suitable for outdoor use: it will not yellow or discolour through exposure to sunlight.

Acrylic can be used for kitchen splashbacks but the following distances should be kept between the outer edge of your hob and the acrylic: at least 60mm for ceramic hobs and at least 200mm for gas hobs.The finish is very clear and has a high level of UV resistance so should look amazing for years to come. Cost: Extruded is marginally cheaper and therefore any requirement for a large quantity of sheets/panels, where the benefits of cast acrylic are not important, is likely to be more cost effective produced in Extruded acrylic. Most earthworm species void waste material underground but a few species deposit casts on the surface. An application of TurfClear will greatly prolong the use of the lawn in the autumn to spring months and protect the existing surface of the lawn so that you might end up with grass cover in the spring.

With its unparalleled clarity, ease of use, versatility, and durability, Cast Clear empowers you to turn your creative visions into stunning reality. These eggs hatch into small worms similar in appearance to the adults they gradually increase in size as they develop.

If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut (unlike PVC). Röhm GmbH, based in Germany, are the manufacturers of Plexiglas® whereas Perspex® is manufactured in the UK by Perspex International Limited. Whilst the brand names Plexiglas® and Perspex® are different, ultimately the acrylic sheet that they manufacture is the same albeit each manufacturer might tweek the formulation to increase or enhance UV-resistance, light transmission or colour. CastClear is a lawn soil cast suppressant and a deterrent, proven in control on both garden grasses, sports turf and artificial grasses.

Many river table projects can be poured in two layers of 25mm per pour, 1 day apart, using GlassCast 50. While offering higher levels of clarity than glass, clear cast acrylic weighs half as much as an equivalent glass panel making fabrication, installation and transportation a far more attractive proposition. It has been added to our range alongside the existing GlassCast 50 products to provide an option for even deeper castings, in a single pour.

This is an expensive product and I assumed that it was well tested and fit for purpose in treating lawns. Use Castclear Worm Cast Suppressant to drive worms away from your lawn naturally without harming them and stop wormcasts. Whether you're a professional artist, a passionate hobbyist, or a DIY enthusiast, Cast Clear empowers you to create stunning and durable resin projects that capture attention and ignite the imagination.

TurfClear is a NEW organic and unique combination of nutrient materials that have been clearly shown to improve the quality of lawns large and small in the autumn through to the spring months. Clear cast acrylic has an exceptionally high level of light transmission allowing 92% of all visible light through the material creating an unparalleled crystal clear finish. But, if the design of your project makes it undesirable to pour two separate layers (for example if you want a swirling pattern running all through the resin) then a single 50mm pour using GlassCast 50 PLUS would almost certainly be preferable.To create stunning translucent colours (like stained glass) just add a few drops of our resin tinting pigments.