As BAC50 possesses antimicrobial and antifungal processes, it is highly effective in killing and controlling biofilms, however you can not use it to kill moss. Mechanical removal will be required prior to applying a licensed and approved biocide. Using a mechanical brush or pressure washer to remove the moss is best practice. Bac50 is used in both the textile and leather industry, it helps protect natural fibres from mould and fungi by inhibiting its growth while facilitating softening and dyeing of acrylic fibres and leather as well.

Generally, biocides are useful for controlling unwanted, dangerous, and harmful organisms. They not only kill pathogens but also none pathogens, so this means in some cases they might be dangerous for living things. It is even riskier for pregnant women, toddlers, unborn, and people with terminal and chronic diseases.

Customer Reviews

Once applied, do not let the product dry out, reapply if the surface becomes dry. Rinse clean with plenty of water. Marking may occur initially on some surfaces, however, this will fade over the following 48 hours.

Apply a generous amount of the product neat to the dry surface. Leave the product to react using the following timings: BacClear Pro should be expected to keep render free from contamination for a minimum of 2 years. This period can be prolonged with a maintenance plan to be agreed between the applicator and their customer. For multi layered surfaces (5 or more), a second coat is recommended. Use a dabbing motion, without the need to remove the first coat Smelly Gel Pro is highly concentrated and efficient at removing rust and oxidisation from marble, stone, wood, paint, fibreglass, concrete and limestone.BacClear Pro should be expected to keep light staining away for 2-3 years. This period can be prolonged with a maintenance plan to be agreed between the applicator and their customer. Professionals often use this for cleaning purposes and to stunt regrowth of growth, but it’s also applicable for almost anyone to use. For best results, you may reapply this on your surfaces at least every two years, depending on the rate of dirt build up. Also, it’s best to remember not to use the product if weather forecasts rain or wind in 24 hours.

Although slightly different, our maintenance contracts are designed with our products in mind, giving our customers the best results and ensuring that your surfaces look pristine for longer periods of time. Our Approved Applicators have the knowhow, equipment and products to achieve this. The initial cost of restoring your surfaces will be higher than an annual maintenance plan as this is where the majority of the work takes place. Cutting through the biofilms and getting them under control. After this procedure has been completed, the results achieved can be maintained for years to come with, in most cases, a spray treatment of one of our hard surface biocidal products. To apply, it’s recommended that you first remove as much moss as you manually can before treating the surface. Then, since it’s highly concentrated and not ready to use, you should also be extra cautious when preparing the product; use at least eye goggles or gloves for safety to avoid skin irritation. Dilute as per the instructions on the label. Again, biocides are effective when used as antiseptics that treat infections in damaged skins and the mucous membrane. When applying BacClear Pro we recommend using a sprayer or a brush attachment attached to the correct spray equipment for application. Diluted to a ratio of 1:20 and applied at a rate of 1 litre per 0.5m 2.Moreover, it is also not recognised to accumulate in the organic environment even under regular use. It exuded a high level of biodegradability when it was tested according to the OECD test protocol. This means that it doesn’t bioaccumulate in organisms since clays and humid substances readily neutralise their aquatic toxicity, preventing it from migrating across different environmental compartments. Cover the lid with a cloth and hold away from face during opening Pour RapidStrip Pro into a suitable container and replace top of can Apply a generous even coat by brush do not over brush When using BacClear Proto treat roof tiles & slates, we would advise to pre-clean the surface first using the necessary equipment enabling you to do this safely. Smelly Gel Pro is designed to remove rust stains from delicate surfaces, when other rust removers cannot be used due to their corrosive nature. Smelly Gel Pro converts rust compounds in to water soluble solution, that will change colour on activation. This can then be rinsed away with clean water. The Neutral PH allows for a winder range of uses, for example Tannin stains on render. Because of this, BacClear Pro provides for a safe, fast, and powerful antimicrobial activity even at low ppm. Its strong detergency also guarantees the seamless removal of organic soil, which often contains various microbes.