Polar Seal is pH Neutral and can be used on full exterior of the vehicle, avoiding the windscreen. Do I use Polar Seal instead of a wax? Polar Seal is a durable hydrophobic coating. However, it does not offer the same long-term protection as Ultra High Definition Wax or Extra Gloss Protection.Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: Don’t forget to hose down your car for a final time when you’ve done all your soaping and rinsing, this will budge those last little bits of dirt and dust that gather in those hidden spots. Wheels The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt. It is important that Polar Seal does not dry on to the surface of the vehicle. Once the car has been coated it should be rinsed immediately.

Don’t forget to protect your wheels once you’ve finished cleaning them, it would be a shame for all that hard work to go to waste! But remember to leave on your wheel protector for several hours before hitting the road again. Cleaning your car interior Polar Blast is used as a pre wash snow foam and produces a highly dense foam blanket to your vehicle to help maximise cling time and loosen dirt.Polar Seal contains silicones, which in some cases, can create smears once wiper blades are used on the windscreen. We would recommend cleaning your windscreen after you have applied Polar Seal to the rest of your car as part of your car cleaning process. How long should I leave Polar Seal on my paintwork? Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur.

div>

You may also like…

There is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month. Polar Seal contains silicones, which in some cases, can create smears once wiper blades are used on the windscreen. We would recommend cleaning your windscreen after you have applied Polar Seal to the rest of your car as part of your car cleaning process. Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. product/helpAdviseTab.hbs -->