Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required). Can be sprayed usingan airless sprayer such as a Wagner or Graco ideally using a minimum 1mmflat fan tip nozzle (9 – 11 thou tip). The colour swatches are an indication only and representative of the product applied to clean new/pale timber and rough sawn pine (2 coats). The final colour finish can vary considerably due to the age, type & condition of the timber being treated and will darken with multiple coats. Viewing colours on multiple digital screens can vary considerably and may not be totally accurate. We always recommend carrying out a small inconspicuous test area first. It is the Customer/end users responsibility to satisfy themselves that the colour finish is correct before full application. Smooth Pine (2 coats) What is the difference between Barrettine Wood Preserver, Wood Protective Treatment and Universal Preserver? Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions)

Areas affected by mould, algae or fungi should be cleaned with a stiff brush or scraper then treated with Barrettine Mould and Mildew Cleaner Brush, dip, roller or spray in suitable conditions. (When used outdoors make sure weather conditions are dry and still). Barrettine’s Wood Protective Treatmentis a wood sealer for rough, sawn or smooth timber. It contains water-repellent resins that help reduce decay, swelling, and twisting of wood. Its pigments have good UV fade resistance and will help protect the wood from UV damage. The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions). This product cannotbe sprayed with a traditional pump action garden sprayer. Brush down the wood with a stiff broom or brush to remove any ingrained surface dirt and biological growth

You may also like…

Apply by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still). SPRAY APPLICATION: Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions) Application: - by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still). The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. Compatible with many products both water- and solvent-based. Compatibility with any additional coating should always be confirmed by a test patch.

Barrettine Wood Protective Treatment is also perfect for treating for many outdoor treated timber structures like sheds, summerhouse and gazebos. The treatment seals wood to give excellent water repellency and is oil based for deeper penetration. Colours: - The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.

Barrettine Premier Wood Preserver is a high-quality, low odour, oil based wood preserver that is deep penetrating. Barrettine wood preserver is used for wood protection against wood-destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. This wood preserver provides a semi-transparent matt/satin finish allowing the natural wood texture to be visible, it can be used on pressure-treated wood, treated timber or untreated wood. This high-quality wood treatment is suitable for rough, sawn or smooth timber, does not require over sealing for wood protection. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists. It should be noted that the above products are preventative treatments and these products are unlikely to kill/control mould spores already present within the wood. If this is suspected, Barrettine Mould and Mildew Cleaner should be used, prior to coating the wood. The bottom of wooden structures e.g. sheds will also require more frequent treatment with Mould and Mildew Cleaner, as the action of rain splashing on the ground will distribute mould spores onto the wood. Frequent treatment with Mould and Mildew Cleaner can prolong the life of the wood coating. Also, repeat and periodic re-treatments using the above wood care products will enhance and protect the appearance, and prolong the life of the wood. Ensure that surfaces to be treated are clean, dry and free from surface dirt, debris, mould, algae and other surface contaminates. New or Bare Timber

Barrettine wood protective treatment is Oil/solvent based for deeper penetration. Low odour ready to use formulation. Superb quality water repellent resins. UV fade resistant colour pigments. High level, long lasting protection. For unpreserved / untreated timber we recommend using Barrettine Universal. Product features: Areas that have been affected by mould, algae or fungi should be treated with Barrettine Mould and Mildew Cleaner prior to applicationProvides non-biocidal protection, nourishing the wood and repelling water ingress that can cause decay. Less protection is given than Barrettine Wood Preserver Barrettine’s Wood Protective Treatment: - is a wood sealer for rough, sawn or smooth timber. It contains water repellent resins and a biocide film wood preserver to prevent the surface growth of mould/algae and together this helps reduce decay, swelling, twisting of wood. Pigments have good UV fade resistance and will help protect wood from UV damage. We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations For use on bare wood which will be over-coated, for example with Barrettine Log Cabin Treatment or opaque paint, or physically protected from the elements. For added protection against mould, algae and wood boring insects, pre-treat garden wood with Barrettine Universal Preservative or Barrettine Premier Wood Preserver for a similar colour range