The energy an object can radiate is measured on the electromagnetic spectrum, with the low frequencies being a low risk and high frequencies being extremely harmful. Objects with low frequencies are things like power lines, your phone, and your microwave. High-frequency objects would be things like actual radioactive (toxic) waste, x-rays, and UV radiation (like a tanning booth). Ghosts and EMF

Mel meter « Equipment – Event Showcase – Reports Mel meter « Equipment – Event Showcase – Reports

Most electromagnetic fields encountered are generated by household or industrial appliances. Most EMF meter manufacturers calibrate them to measure 50 Hz and 60 Hz. These alternating fields are the main frequencies used in the US and European countries. Some other meters can measure fields alternating at as low as 20 Hz. These are usually much more expensive and are generally only for specific research purposes. This is all great to know, but how does it relate to ghosts? There are theories stating that ghosts can manipulate this energy. Professor McFadden from the University of Surrey says that “the conscious mind consists of an electromagnetic field, a field that does not disintegrate when we die”. By this logic, ghosts still have this electromagnetic field which can be detected with an EMF meter. Perhaps the most important characteristic that distinguishes EMF readers is the direction, or directions, in which they detect electromagnetic fields. Single axis meters, for example, must be pointed in the direction of the EM field to detect it. I just recieved my k2 meter, this thing is awsome. i was testing it out around my home to et a fel for how the device works and i found that my microwave is putting out rediculous levels. now i am ready to go fine some ghost The phone is one item most people carry which detects EMF. The use of phones has increased since their introduction in the 1980s. The government was concerned about human health and phone use. Their researchers began the biggest study to compare cancer cases in phone users in 2000. The types of EMF exposureThe device is named after his daughter ‘Mel’ and the model number is her year of birth 87 and her year of passing 04 –“Mel-8704”. For a long time there have been theories that spirits can manipulate the energy fields that surround us. These theories go on to say that energy is heat so when it’s transferred from one location to another it leaves behind a cold spot. Realizing that the paranormal community consists of men and woman that donate their spare time and services to help others, Gary initiated a program within his company that donates 10% of his Mel Meter production to various people, paranormal groups, auctions and charities. He believes that the paranormal community in general in time, can and will make a huge difference in our every day lives, and in his words are the “Good Guys” and he simply wants to help these people however he can. By trying different angles approaching the object under measurement, record the highest value shown on the display. Although this is great to know, how does it link into ghosts? Theories are stating that ghosts can be manipulative with this energy. Professor McFadden who has researched at the University of Surrey states that “the conscious mind consists of an electromagnetic field, a field that does not disintegrate when we die”. By this logic, ghosts still have this electromagnetic field which can be detected with an EMF meter. Galka felt he was communicating with Melissa after she died through various means: smelling her perfume, feeling her kisses, and electronics being turned on and off. He embarked on paranormal research, and discovered that the technologies used in the field were mainstream gadgets and devices intended for other scientific research tasks. So he developed the Mel meter, specially tailored to the special parameters of paranormal investigation.

Mel-8704R Meter

To use the MEL meter, position your device at different angles to see how it impacts the digital readout. As a ghost hunter, it’s vital that you seek out, detect, and document any and all unexplainable phenomena that may be occurring in a given environment. Electromagnetic fields surround us at all times, and theories from within the branch of paranormal investigations suggest that ghosts may have the ability to manipulate these fields. What is an EMF Meter? Attaching it to a tripod, or placing it upright onto a surface, is ideal when the potential activity is confined to a single room. However, if your paranormal investigation is on the move, then having it handy at your hip can be extremely convenient.

The Mel Meter is also really responsive to temperature changes. When I tested the EDI+ Meter, after 20 minutes in a fridge, the EDI+ only dropped from around 22°C to 19.4°C, however the Mel Meter with its external probe took just two minutes to drop to 6.7°C - a pretty accurate reflection of the temperature of the inside of a fridge that's just been opened. Moving the device from side to side or rotating it may change the reading. The highest reading is the most accurate. Temperature is important when detecting ghosts with EMF. For example, if you detect an energy spike with your meter and there is also a decrease (or increase) in temperature, you definitely to investigate further because there may be a ghost present. On the other hand, if there is a small spike on your meter and no change in temperature, that could just a natural EMF.

Mel Meter MEL-8704R Rem Pod ATDD EMF Temperature Light Sensor Mel Meter MEL-8704R Rem Pod ATDD EMF Temperature Light Sensor

Measuring the field radiation range is a growing concern, especially since the 5 Ghz WIFI. It’s a frequency range believed to be harmful to humans. Because of this, the price of radiation measurement sensors has increased dramatically. Suppose you are in a large indoor location. Putting different EMF Meters in each room is handy. If you have one with a sound alarm, it can notify you from a convenient distance. And will help you catch more paranormal evidence should things occur in multiple places. Asking the ghosts to move away from it and move closer can help validate any measurement you get. As this will prove, it is paranormal. And that the entity is intelligent and not just residual energy. The K-II EMF meter is one of the most favoured options. The meter is insanely simple to read and has been used on many ghost hunting shows. Many meters come with unnecessary additions or extra features, but the K-II Meter is simple and straight to the point.When using an EMF meter, you should always make sure you take a base reading. This means you need to take a reading of what your meter displays around the area where there is zero paranormal activity. When you are using the meter for an investigation, take note of any spikes especially if the jump is big. The little spikes are okay to take note of, but they may just be naturally occurring. Almost all electric instruments generate a magnetic or electric field on various frequency ranges. Measuring electric fields and magnetic fields is quite simple. With a digital handheld measurements meter. Electromagnetic Field and the Supernatural Not all meters are created equal. Most electromagnetic field detectors are single-axis. These are usually the cheaper sensors and only measure field strength in one direction. The manufacturer will usually put this sensor in to keep the price down. Some of these meters are nearly free in price.

EMF Meters and Detectors for Ghost Hunting – 2021 Best EMF Meters and Detectors for Ghost Hunting – 2021

The Mel Meter MEL-8704R is an EMF Meter, Temperature Meter and Light all in one piece of equipment. What does the Mel Meter MEL-8704R do? A range of custom designed tools for paranormal research that were born out of the tragic death of a 17-year-old girl. Devastated by his daughter's death in a car accident in 2004, Gary Galka and his family started to experience unexplained phenomena at home only days after the tragic accident. Using his electronics expertise Gary began designing devices and techniques to try and enable his daughter to communicate more easily from the other side. The first tool in the range was the Mel-Meter 8704, named after his daughter (Melissa) the year she was born and the year that she passed. Gary and his family believe they now have regular communication with Melissa assisted by these tools and have now made the devices and techniques available to the wider paranormal research community. New devices are being developed on a regular basis to join the range of Mel-Meters, sweep band Spirit Boxes, Rem Pod environmental detectors and many more. Gary's paranormal research tools are now regarded as some of the best in the field and have become the industry standard for paranormal groups, TV shows and researchers across the globe. This list is based on our own experience. All teams will have different methods, techniques and beliefs. So, this list might not be for everyone, but we hope it will help you find the most suitable paranormal tool for your next investigation. The readouts on the Mel Meter MEL-8704R for Ghost Hunting are displayed in mG or µT, °F or °C for your added benefit. The device is incredibly high resolution and fast response. Included is a basic 1inch K-Type Thermocouple. This can be used in a large variety of commercially available thermocouple probes which offer extended temperature ranges. This allows you to streamline your kit for paranormal investigations, and compile a large number of useful components into a smaller amount of gear. How to use the Mel Meter MEL-8704R? The app is also really simple to use. The meter clearly displays the reading, along with a graph of past changes. Features of this app include;Amazing piece of equipment, definitely a need for any paranormal lover! It's very unique and does everything you expect it to but better. Incredible buy. I love it! This k2 meter works perfect. It has never let me down when it lights up. Now I own 2. Best ghost hunting gear out there. Thanks ghost stop