Zinsser AllCoat Exterior (Water Based) products have a coverage rate of 12m² per litre/per coat.Zinsser Perma-White Interior has a coverage rate of 10m² per litre/per coat so slightly less. You can however use theZinsser AllCoat Exterior (Water Based) products for interior applications if you wish as well as exterior ones. Yes assuming the previously painted areas are clean, dry, sound and lightly sanded to provide a key. P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P101 If medical advice is needed, have product container or label at hand.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302 + P352 IF ON SKIN: Wash with plenty of water/…P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. Zinsser Perma-White Interior would definitely not be OK for this type of application and unfortunately we have nothing tintable that we could recommend that would be. We would recommend to test on a small area for compatibility and adhesion prior to full application.

Zinsser AllCoat (Water Based) Exterior Satin Black 2.5 Litres Zinsser AllCoat (Water Based) Exterior Satin Black 2.5 Litres

Perma-White Interior Matt Paint - Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. (This finish was previously known as Eggshell.) Technical Information: All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or brushing with a stiff bristle brush to a sound edge. Feather sound edges with a fine grade abrasive paper. Remove all visible signs of organic growth and treat the areas with Zinsser Mould Killer & Remover in accordance with the manufacturer’s instructions. Allow to dry. To prevent product from skinning over close container after each use. Keep lid tightly closed during storage. Protect from freezing.Clean surfaces with a solution of one-cup household bleach per gallon of water or a quality biocidal wash. Zinsser Perma-White Interior Matt Paint–is ideal for areas where a low sheen finish is desired. As a durable paint with a long lasting protection against mildew and mould, this matt finish will be ideal for basements and kitchens. The first coat primes and seals the surface, providing a base for the topcoat. The topcoat completes the sealing process while providing additional moisture resistance and protection. This paint is ideally suited to exterior buildings with timber and metal cladding.

Zinsser Perma White Self-Priming Interior Paint Satin White 2.5L Zinsser Perma White Self-Priming Interior Paint Satin White 2.5L

Data sheet Manufacturer Zinsser For Use By Consumer Use Interior / Exterior Use Interior Water / Solvent Based Water For Use On uPVC Tintable to any colour - Zinsser Perma White Mould Resisting Paint available in both matt, and satin finishes This is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process. dichloro-2-octyl-2H-isothiazol-3-one. Contains a biocidal substance. Contains Reaction mass of: 5-chloro-2-methyl4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no.The satin finish is recommend over the matt for high wear and tear areas due to increased durability. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Zinsser Perma-White Interior Matt | Dulux Decorator Centre

Further safety information can be found in the safety data sheets available in the attachements section above. Zinsser Perma-White Interioris fine for this environment but we do recommend you prime first with Zinsser AllCoat (Solvent-Based).1 coat ifZinsser AllCoat (Solvent-Based) followed by 2 coats ofZinsser Perma-White Interior would be our specification. The matt finish does provide a long lasting protection against mildew and mould, but the satin finish will stand up better to areas exposed to wear and tear, it also has better moisture resistant properties. Assuming the timber stairs are clean, dry, sound and prepared as detailed in the Technical data sheet we can recommend one coat of Teamac Metaclor Antifouling Primer followed by 3 coats of Teamac Chlorvar Chlorinated Rubber Paint.If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume