The tolerance of the sliding carriers in the film housing is not ideal. There's room for some slight tilting. I fixed this by adding bits of thin, dense foam to the slot in the film holder where the carriers sit. That eliminates any play and keeps the carriers level. Complete Accessories】The Slide scanner set supplied 1x barrel, 5x adapters 1x 35mm film holder(Negative holder), 1x 35mm Slide holder(Positive holder), 1x LED Light with 42 beads and Photos- Works Standalone, No Computer/other camera accessories,film scanner required.

I have a few different ways to digitize 35mm film: dedicated film scanner, flatbed scanner, cheap CMOS digitizer, and old school film/slide holder for use with a digital camera and macro lens. I use them all depending on the purpose of the moment.Levels 6500K LED Light】Super bright LED light with soft screen provides 10 levels adjustable Large Viewing Area Ultra Bright Daylight LED Illumination to Render Images in Vivid, Crystal Clear Detail.The length of the control line is 1.5m, you can control the light switch at will. JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film... Description

The supplied adapters allow you to attach the set to different lenses and the angle of view and tilt can be adjusted by using the view angle adjustment ring on the barrel. Dedicated film holders for both film strips and mounted slides2 are included, as well, to help hold the film taut and to benefit handling. Besides that, the set is particularly well-suited for the NIK. D850 camera due to its dedicated Negative Digitizer mode and ability to automatically reverse colors in-camera to expedite the digitizing process. Additionally, you can use the set together with the included LED Light3 to get high quality light source and improve image sharpness. One slight annoyance with my personal gear is that I can't make the extension short enough to entirely fill the frame using my full frame camera with the 50mm macro. At the shortest extension, the lens can provide only about 0.9x magnification instead of 1x, meaning the final pixel resolution of the image is slightly less than optimal. That's a result of the design of the lens housing, so it will likely be different with different lenses. Not a big deal, really.I found my workflow with the ES-2 difficult, and with the camera I was using the results were no better than using a scanner. As I didn’t want to replace my digital camera I just got rid of the ES-2, but if I’d have kept it I’d have had to do something. I think foam would probably solve the issue on the ES-2 too. I've tested this with some extremely contrasty slides. The process can pull out amazing tonality in both highlight and shadow areas that I just can't get with the scanner. But I would only be doing that kind of thing with 'special' images, of course. It is recommended to select the image stabilizer switch of the lens to "OFF" when using the FDA-S1. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.