In addition to filtered cabinet cooling fans, we offer heat exchangers and enclosure air conditioners. These units are fitted internally to the upper aperture of the cabinet meaning is won't increase the overal height of the cabinet. The Rack Side Air Distribution Unit is a 2U rack mountable air distribution product for networking equipment or servers with side to side airflow.

Fans are set to exhaust air out the frame but this can be reversed to intake air using a screw driver. Directs air up or down the side of the rack, supplying cool air to the inlet of side-to-side airflow equipment. The 2 way RR-FT-2 is for use in 600 by 600 mm or 800 by 600 mm Floor Standing cabinets; the 4 way RR-FT-4 is for 600mm by 800mm or 800 by 800mm server cabinets and the Large 4 way RR-FT-14 is for 800 by 1000 mm server cabinet.To find out if a cooling fan is suitable for your application, contact our expert sales team at Thermal Edge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the right hand side of the unit when viewed from the discharge end. Cabinet fans with integrated, lowpressure drop filters, manufactured from galvanised sheet steel and internally isolated with 30mm thick mineral wool (M0), airtight intake and discharge joints, easy access . Housing equipment with side to side airflow creates many challenges for IT and facility managers, particularly in regards to cooling. The belt-driven assembly can be supplied at the left hand side of the unit (TI version), Vertical discharge (code V) configuration.

Peak Performance Modern, high-tech A/V equipment operates at high temperatures, especially when it runs for long periods of time.

Because most enclosures are designed for a front to back airflow pattern, it is difficult to maintain ideal operating temperatures on side to side airflow equipment.

Makes some noise especially at higher speeds but the sound from my home cinema system soon drowns it out. Quiet exhaust fan unit designed to be fitted into sealed wooden cabinets, closets and enclosed equipment racks where hot air is not being expelled. I've used it to add ventilation to an Ikea Besta cabinet but have paired it with with the Thermal Trigger.All setups with more than four daisy-chained fans must have their inline speed controller set to high to prevent overload, e. Single-phase external rotor motors 230V 50Hz, IP55, class F, with thermal protection, speed controllable by tension. Both metal and plastic filtered fans have easily removable grilles facilitating easy cleaning and replacement of filters.