We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items It delivers an attractive, low sheen, slip resistant finish that provides unrivalled protection against weather damage, as well as prevention against oil and petrol marks. P102 Keep out of reach of children.P101 If medical advice is needed, have product container or label at hand.P280 Wear protective gloves/protective clothing/eye protection/face protection.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P273 Avoid release to the environment.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P301 + P310 IF SWALLOWED: Immediately call a POISON CENTRE/doctor/…P331 Do NOT induce vomiting.P501 Dispose of contents/container to … For maximum performance ensure all surfaces are clean and free from any dust or loose material that may interfere with the adhesion of Thompson's Drive Seal.Remove dirt, moss, lichen, dust or loose material by brushing with a stiff bristle brush. Use Thompson'sOil & DriveCleaner to remove existing oil/grease deposits and to clean drivewaysprior to application. Rinse with water and brush the area to be coated to remove all surface debris. Taking account of the existing surface, fill any holes or surface imperfections with a suitable cold cure tarmac in accordance with the manufacturers instructions. H226 - Flammable liquid and vapourH336 May cause drowsiness or dizziness.H372 Causes damage to organs through prolonged or repeated exposure.H304 May be fatal if swallowed and enters airways.H411 Toxic to aquatic life with long lasting effects.H335 May cause respiratory irritation.

Thompson's Drive Sealcan be applied by long pile roller to damp, but not saturated surfaces. Using a roller tray, load the roller fully and apply in an even coat ensuring all irregularities are covered. To ensure maximum durability apply two coats. Once the second coat has been applied allow 4 hours before subjecting the surface to light traffic, Thompson's Drive Sealdoes not reach its optimum performance until after a few days and should be left overnight before subjecting to heavy use. In cold, damp conditions recoating times will be extended. Before application ensure all surfaces are clean and free from any dust or loose material that may interfere with the adhesion by clearing with a stiff bristle brush. Use Thompson’s Oil & Drive Cleaner to remove existing oil or grease deposits and to clean driveways. It works well under most weather conditions – protecting and reviving tarmac driveways and garage floors.