Fully redesigned, easy-to-use interface, including a new design of modulation sources and floating slot panel AWIN, Sovendus, Meta-Pixel, Google Ads, Microsoft Advertising, creativecdn.com (RTBHouse), Ads Defender The sandblasted build platform guarantees the highest possible adhesion of the print result - the risk of detached, unfinished prints is minimised in this way. The air purifier can be operated with an activated carbon filter via the USB port, effectively filtering odours and vapours.

Before any version could be put into production, work on all Saturn variants was stopped in favor of launching all future payloads from the Space Shuttle. With some of Elegoo’s earlier printers, this guessing has yielded softer prints that were often gouged with the spatula upon removal. It appears that the company has increased the exposure time with the latest test prints, so it takes a bit longer, but the model is less likely to be damaged. One of the most obvious improvements of the Elegoo Saturn 2 is the 8K high resolution screen. The screen is 10 inches, which is a noticeable improvement over the 8.9-inch screen on the original Saturn and the 9.1 inch display that came on the Saturn S. Saturn is FabFilter's most essential efforts yet - and considering the rest of their range, that's really saying something. There was a large payload gap between the Saturn IB's 46,000-pound (21,000kg) low Earth orbit capacity and the Saturn V's 310,000-pound (140,000kg) capability.We avoid CO2 emissions wherever we can! Our remaining carbon footprint is compensated through eco-social projects. By applying subtle modulation to crossover frequencies, dynamics, band levels or tone controls, great warmth and definition can be achieved. Fresnel Collimating Light Source】Fresnel collimating light source consists of 48 highly integrated UV LED lights that work with FCL system Fresnel lens to emit a uniform light beam of 405nm wavelength, excellent printing accuracy, and a more smooth surface finish. Saturn 2 includes 12 new distortion styles, a radically overhauled and expanded modulation system, enhanced envelopes, linear phase processing, and a new ‘Superb’ High-Quality mode. The new distortion styles, nearly twice as many, included ‘Subtle’ versions of the Tape, Tube, and Saturation styles for warmth and four new guitar amplifiers, three Transformer styles. All of this means that you use Saturn 2 for everything from sweetening a mix bus through to guitar amp simulation. The proven software ChiTuBox allows you to generate high-quality print files in the storage-friendly .ctb format. File size is reduced by up to 90% - despite 8x anti-aliasing for smoother print surfaces.

It is best to start by removing the model above the resin tank. I found that using the metal spatula on the build plate worked quite well. The reason you want to remove the model first is to avoid dripping any resin onto the LCD screen, which is very difficult, if not impossible to remove once hardened. Leveling the printer was pretty straightforward. The first step is to loosen the two bolts on the sides of the resin tank. Then using the control panel on the front of the printer, you want to raise the build platform to a sufficient height that the resin tank can be removed. The popular Elegoo Saturn gets another new edition: the Elegoo Saturn 2! The successor is equipped with a huge 10-inch 8K monochrome LCD, allowing for even larger and more accurate prints. The huge build volume of this MSLA-3D printer makes it possible to print detailed, large-format objects. After this, it’s just a matter of generating supports like with the first model and printing it out. The Saturn 2 is equipped with dual linear rails along the Z-axis, which ensure high stability. The movements of the build platform run smoothly. The MSLA 3D printer allows you a Z-axis resolution of up to 0.00125 mm.

After printing, the model will still likely have some leftover resin on it and, to get a resin print to look its best, you will want to clean it. Take just a little time to get to know Saturn 2 and you’ll find that creating complex, multiband treatments with macros controlling multiple parameters is genuinely useful when finding the sweet spot when adding colour to your productions. Distortion and saturation play a very important role in music production. From subtle, clean and warm tube or tape saturation to the wildest multiband guitar amp effects: FabFilter Saturn 2 delivers. The Elegoo Saturn 2 includes a pretty standard array of accessories that many other Elegoo resin printers ship with including tools such as the diagonal cutters for support removal as well as the metal and plastic spatulas.

To wash the models, I used Elegoo’s largest Wash and Cure station, the Mercury X bundle. Although this was designed with the original Saturn and Saturn S in mind, which have slightly smaller build volumes, I found the build platform still fit into the tank. The only issue I had was with some of the taller prints bottoming out. Once that is complete and you have removed the hardened resin, you should empty the resin tank. The plastic spatula works well to assist with this. Emptying the resin first allows you to inspect the FEP film as well. If it gets too damaged, you may need to replace it before continuing. After that, run a tank clean cycle through the printer’s menu, which will expose the entire bottom layer of the tray to UV light and create a solid mass of any little pieces that may have broken off of the failed print. You may consider adding a piece of removed support from a previous print to one corner first to make removal of the mass easier.Larger than Saturn's Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch. For the first model, I went with the Tower of Pi to show basic slicing. This one is fairly straightforward since it doesn’t have any large solid sections, but it also has a lot of detail making it a great demonstration of a resin printer. Prints can and eventually do fail even on resin printers, though I did not experience any failed prints on the Saturn 2 myself. Whether it happens due to support structures that are unable to support the mass or any number of other things, you still will have a mess to clean up before you can print again. FabFilter Saturn is my new favorite plug-in. I love distortion and I'll put it on everything from vocals to 808's.

The Saturn INT-19 would have used smaller solid boosters, derived from the first stage of the Minuteman missile, to supplement the thrust of the S-II. Eleven configurations were studied, using between four and twelve solids, with some being started at lift-off, and some being started in flight, and varying propellant loads in the Saturn stages. The S-II stage would have been modified by refitting the J-2–SL engines with reduced expansion ratio nozzles, to increase sea level thrust to 174,400 pounds-force (776kN) per engine. The highest total impulse configuration would have used twelve boosters, with eight started at launch and four started after the first group had been jettisoned. It would have been capable of lofting a payload of 75,400 pounds (34,200kg). [1]

It also comes with a set of hex key wrenches and some spare screws in case any servicing or repairs need to be performed during the printer’s lifetime. There are two pairs of latex gloves and two surgical style masks for personal protection, but you will probably want to get some higher quality masks and additional gloves for working with resin. To start with, I loaded my model into Chitubox Pro just as described above and got it sitting at an angled orientation. I oriented with the face pointing away from the build platform so that there would be fewer supports on the face. One thing that you hear discussed a bit less often is exposure to UV light. With the Elegoo Saturn 2, I tested whether removing the cover would turn off the UV light source and unfortunately found it continues to emit UV light. Although it’s likely not any stronger than sunlight, it is best to avoid looking directly at a UV light source with your eyes if you can help it, and it is a good idea to avoid direct exposure to your skin as well. Most of the time the resin will be covering up the UV light source, so this isn’t really much of an issue, but it is something to be aware of. Printing Included Test Prints on the Elegoo Saturn 2 8K