Generally available in 7.500 to 7.650 Metre lengths in Grade 43; however other lengths and grades are available. For your information Kg/m refers to the Kilograms per Metre of the section, as an example a 4.200 Metre length of 48.3 OD x 3.2mm (CHS) Circular Steel Hollow Section (3.56 Kg/m) would weigh (4.2 x 3.56) 14.952 Kg's Total. 21.3 OD x 3.2mm (CHS) Circular Steel Hollow Section (1.43 Kg/m) Proper fraction button is used to change a number of the form of 9/5 to the form of 1 4/5. A proper fraction is a fraction where the numerator (top number) is less than the denominator (bottom number). Arrange the 4-digit multiplicand and 3-digit multiplier for long multiplication method, multiply the multiplicand by Least Significant Digit (LSD) of multiplier and the product underneath to the line in the way that the Ones’s place value of multiplicand and One’s place value of product of LSD of multiplier and whole multiplicand should be vertically aligned in a straight line. When multiplying decimals, say, 0.2 0.2 0.2 and 1.25 1.25 1.25, we can begin by forgetting the dots. That means that to find 0.2 × 1.25 0.2 \times 1.25 0.2 × 1.25, we start by finding 2 × 125 2 \times 125 2 × 125, which is 250 250 250. Then we count how many digits to the right of the dots we had in total in the numbers we started with (in this case, it's three: one in 0.2 0.2 0.2 and two in 1.25 1.25 1.25). We then write the dot that many digits from the right in what we obtained. For us, this translates to putting the dot to the left of 2 2 2, which gives 0.250 = 0.25 0.250 = 0.25 0.250 = 0.25 (we write 0 0 0 if we have no number in front of the dot).

Find the product of multiplicand and most significant digit (MSD) of 3-digit multiplier, and write down the product under the earlier product but the One’s place value of product should start from the Hundred’s place value of multiplicand. Insert a decimal point in the product so it has the same number of decimal places equal to the total from step 1. Multiply as above, but this time write your answers in a new row, shifted one digit place to the left. Use long addition to add your number columns from right to left, carrying as you normally do for long addition.Our friendly team will be happy to discuss all of your hollow section requirements, so why not give us a call today on 0800 123 70 10 for advice and to get our latest prices. alternatively, drop us a line at: [email protected] Starting with the ones digit of the bottom number, the multiplier, multiply it by the last digit in the top number To find the resulting product, find the sum of 3 individual product of multiplier and multiplicand.

Generally available in 7.500 to 7.650 Metre lengths in Grade 43; however other lengths and grades are available. For your information Kg/m refers to the Kilograms per Metre of the section, as an example a 4.200 Metre length of 50 x 30 x 3mm (RHS) Rectangular Steel Hollow Section (3.45 Kg/m) would weigh (4.2 x 3.45) 14.49 Kg’s Total.Generally available in 7.500 to 7.650 Metre lengths in Grade 43; however other lengths and grades are available. For your information Kg/m refers to the Kilograms per Metre of the section, as an example a 4.200 Metre length of 40 x 40 x 3mm (SHS) Square Steel Hollow Section (3.45 Kg/m) would weigh (4.2 x 3.45) 14.49 Kg’s Total. Proceed right to left. Multiply the ones digit of the bottom number to the next digit to the left in the top number. If you carried a digit, add it to the result and write the answer below the equals line. If you need to carry again, do so.

Find the product of multiplicand and 2nd least significant digit of 3-digit multiplier, and write down the product under the earlier product but the One’s place value of product should start from the Ten’s place value of multiplicand. Proper fraction button and Improper fraction button work as pair. When you choose the one the other is switched off.When you've multiplied the ones digit by every digit in the top number, move to the tens digit in the bottom number.