The next game I wanted to try was Gran Turismo 7 on PlayStation 5. This game also required a small amount of time to adjust to the difference in latency, though it took less time than with King of Fighters. Unfortunately, GT7 does not have a 120fps mode. While running the game in its 4K/60 HDR mode I found that my breaking was slightly off when going around corners. Outside of that everything else virtually felt the same as when played on my OLED. This was another game that was displayed beautifully on the projector with rich and vibrant colors, great HDR, and pure immersion. Another treat playing at 100 inches in HDR.

As well as minimising input lag, the Game and HDR Game modes are designed to bring out shadow detail in darker areas without reducing contrast, and this actually seems to work. Whether venturing underground in Elden Ring or investigating the deepest, scariest spaces of The Witch Queen, I was able to see my way forward and approach enemies with ease. Gaming. I'll start with gaming since it is this projector's primary focus. All gaming was done using BenQ's Game mode with Fast Mode on and Details Adjustment on Low as I found that provided the best balance. During my time with the TK700 I played several games across multiple genres. I started with the Xbox Series X and Halo Infinite. Immediately upon just going into the Series X dashboard I was able to feel the responsiveness. With the Series X I had it set to output at 4K/60Hz, and while in game it felt great. It wasn't as fast as, say, a dedicated gaming monitor or a something like an OLED, but it was pretty good—to the point that I didn't have to change anything with how I play normally to adjust. The HDR added a great sense of depth and highlights. I didn't feel like I was missing anything and being able to play with that level of responsiveness at 100 inches was a real treat.For full HD 3D, the TK700 supports DLP-Link glasses and offers a single 3D mode. I didn't notice any crosstalk in my tests and saw only a hint of 3D-related motion artifacts in scenes that tend to cause them. However, using two different DLP-Link glasses—including one from BenQ—I ran into a repeatable problem that I've never seen before. At specific points in one of our test clips, the colors first changed suddenly and then the glasses lost sync with the left-right alternation of frames. BenQ says it has not been able to replicate the issue, and that if it were to show up, it would be covered under the projector's warranty. The TK700 did a decent job with shadow detail and highlights in SDR. In HDR it didn't fare as well as I would have hoped; note that the TK700 does not offer any type of dynamic iris to assist with dark content. Motion was excellent however in everything I demoed while using it from games, to movies, and test patterns. This projector does not have any motion interpolation features, which makes perfect sense considering it is a gaming projector and to get the best performance when it comes to input latency you would want all of that turned off. So it's nice to see it has such good motion on all types of content without the need of such features. The devices I used for reviewing content post-calibration were Xbox Series X, PlayStation 5, Gaming PC with Nvidia GeForce RTX3090 graphics, Oppo UDP-203, and Fire TV 4K. The BenQ TK700 is a very competitively priced, high-lumen gaming projector with excellent input lag suitable for today’s fast-paced gaming. Its performance will allow users to game on the big screen without breaking the bank.

The TK700 comes with a wide range of preset modes to make the most of your projector. Featuring 3D, Bright, Cinema, Game, HDR, HDR Game, HDR10, HLG, Living Room and Sport preset modes with unique settings for each mode, it’s easy to tailor the projector to your ideal setting. Among the other notable features of the TK700 is 3D, which is actually very bright when triggered, though the projector does not offer any control to increase or decrease the 3D effect. Also, the TK700 includes BenQ's LumiExpert, which is useful for automatically adjusting perceived brightness by tweaking the gamma based on the ambient light in the room. This feature may prove useful if you place this projector in a multi-purpose room such as a living room that has a fair amount of ambient light that changes throughout the day or you like to watch with different levels of room lighting at different times. Initial impressions of the out of the box (OOTB) performance pre-calibration were that Bright and User would be very suitable for Bright Room viewing with a fair amount of ambient light. If you wanted a little more accuracy in that setting, the Living Room picture mode would be the ideal go-to. Dark room viewing would be best to utilize Cinema picture mode. With any of these picture modes using either Native or Normal color temperatures would come down to preference. The HDR modes are a little simpler due to both modes performing roughly the same. None of the picture modes were dead on accurate OOTB however, and that was very visible in all of the colors. Calibrated image settings from any third-party do not account for the significant potential for sample-to-sample variation, nor the different screen sizes and materials, lighting, lamp usage, or other environmental factors that can affect image quality. Projectors should always be calibrated in the user's own space and tuned for the expected viewing conditions. However, the settings provided here may be a helpful starting point for some. Always record your current settings before making adjustments so you can return to them as desired. Refer to the Performance section for some context for each calibration. SDRDesigned for the fastest gaming response, the BenQ TK700 brings cinematic gaming, without compromise. Zoom Lens Light Loss. The TK700's light loss when shifting from the widest zoom ring position to its longest telephoto ring position was 16.1%. Similar to its predecessor, the TK700 has a specification of covering 96% of the Rec.709 color gamut; we verified it with a very close measurement of 94.6%. So, while there are definitely some similarities between the two models, the most obvious difference is in throw ratio, where the TK700's 1.3X zoom is spec'd at 1.13 to 1.46:1. The TK700 also has only one special genre-based game mode where its predecessor had three (more on that below). Outside of the obvious difference in the lens (which has a shroud on the TK700STi to prevent light spill) and a few various markings, such as the LumiExpert and 4K badges, the design of the TK700 and TK700STi look identical. The second is that the high brightness levels make the TK700 usable in daytime. Sure, you lose some contrast, making it hard to make much out in the murkier dungeons of Elden Ring, but otherwise all is fine. What’s more, the projector is still usable in the Smart Eco setting, which doubles the Normal lamp life of 4,000 hours without reducing the brightness levels to a daft extent.

The TK700 utilizes a lamp based light source and Texas Instruments 0.47-inch DLP chip. Any single chip DLP projector has the potential for showing rainbow effects, but fortunately, during my time with the projector, I did not experience any in any content that I viewed. Of course, 4K projectors that use the 0.47-inch DLP DMD are not true native 4K. They actually utilize 4-way XPR (Expanded Pixel Resolution) pixel shift at 240Hz to take the DMD's native 1920x1080 resolution up to 8.3 million pixels on screen. The projector does accept a 3840x2160 resolution signal and it's actually quite sharp, to the point where only those with the keenest eyes would likely be able to see it is not native 4K. Featuring super-high brightness at 3200 ANSI Lumens, the TK700 is ideal for use in ‘normal’ living room light levels. This means you get vivid, dynamic colour, without having to draw curtains and blinds. The 3,200 ANSI lumen rating for the TK700 is enough to fill a 260-inch diagonal, 1.0 gain 16:9 screen in a dark room, according to Society of Motion Picture and Television Engineers (SMPTE) recommendations. Using the lower brightness Game mode, the image was easily enough for a 90-inch 1.0-gain screen in a dark room, or an 80-inch screen in a family room at night with lights on. In the daytime with the same 80-inch screen and light streaming through windows, the image was watchable, but washed out. For audio, the onboard 5-watt chamber speaker delivered sufficiently high quality to be usable at high enough volume to fill a small to medium size room. For better quality, you can connect an external audio system using the 3.5mm audio out port or the one HDMI port that offers audio return. Input Lag. Input lag measurements were taken using the lag measurement function on a Murideo 8K Seven Generator. Within the TK700's Game picture mode, in the Game Settings menu, Fast Mode must be turned to on to receive the lowest input lag. These measurements were performed three times for each signal listed for a total of 30 measurements. All measurements averaged 2-3ms higher than the measurements listed in specification, though additional testing with other displays suggest this may be attributable to the measuring device.Rivals have the W1800 beaten when it comes to HDR, brightness and contrast, then, but you’ll struggle to find another 4K projector at this price that delivers a more natural, cinematic image.