Support for the simplified replacement of a FRITZ!Box with new wizard (FRITZ!Box with FRITZ!OS 7.55) With Mesh networking you can enjoy high speeds while surfing, streaming or gaming. Instead of waiting for breathtaking HD television and your favorite music, your media will wait for you. AVM have confirmed that this is a mesh throughput bug in the latest 7.50 firmware release for the repeater. The 7490 is setup to turn the wi-fi on and off at certain times (for the kids), however; I've found that if it's off and I manually turn the wi-fi on (via a Dect phone or Fritz app) only the wi-fi of the 7490 turns on and the 3000 wi-fi only comes on at the next scheduled on time.

Finally got around to doing a factory default reset earlier today. Sorry for the slow reply, just been too busy to do it. That is odd as the other F!B devices has the option to auto or manually set the time zone. I suppose you could play (if you're keen) with the master time settings – go to manual setting time zone or change the NTP sever? Thanks to 802.11ac technology, the FRITZ! Repeater 1200 offers fast AC WLAN speeds of up to 1733 Mbit / s in the 5 GHz frequency band and up to 400 Mbit / s in the 2.4 GHz frequency band. This repeater is even equipped with a second WLAN 5 GHz radio unit, which offers transmission speeds of up to 866 Mbit / s. Thanks to this high WLAN performance, the user can enjoy smooth online gaming, faster surfing on the Internet and other bandwidth-hungry applications without any cable connections. If you own a FRITZ!Box there are extra benefits, for a start, this will work with the inbuilt mesh networking technology. It will also synch any relevant settings, for example, if you have a guest network set up or a WiFi schedule, you don’t need to set these up again. I then have to try reconnecting via WPS etc, but the only way I can get this thing set up is to factory reset it (hold connect button for 15+seconds)AVM continue their expansion into the UK with a companion product to their brilliant FRITZ!Box routers that can also be used with any router on the market. The FRITZ!Repeater 3000 is a wireless LAN repeater (wLAN) that can be used to boost your home WiFi signal and eliminate any weak signal issues you’re experiencing.

It should simply search for the mesh master and auto connect. Mine takes about a minute from power-up. Given the chipsets are just coming now for WiFi 6E and I think compatibility test procedures between vendors are not finalized yet so it might take a bit before we can buy a set of AVM WiFi 6E products. I'm sure though German speaking users will start asking AVM very soon.I retried over 5 times going through the same reset procedure culminating in a reboot loop. At this stage I thought it may have died but decided to leave it off for half an hour and try again. Connect your FRITZ!Repeater to your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is automatically integrated into the Mesh and marked in the FRITZ!Box user interface with the Mesh symbol . The FRITZ!Repeater then adopts all of the settings from the FRITZ!Box, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception. Changed country and language settings of the FRITZ!Box (Mesh Master) are automatically transmitted to the FRITZ!Repeater I see AVM now have the 6000 repeater – WiFi 6 (and the 7590 ax). I still do not yet see a need (YMMV) to go out and update just to get WiFi 6 (and the bragging rights lol...).