It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on the application.

The DVM (Digital Voltage Meter) option adds a digital display of battery voltage, charge current and cumulative amp hours from the solar array. Xantrex's enabling technology converts raw electrical power from any source— solar panels, central utility, backup power, distributed or renewable generation—into high-quality electricity required by today's electronic and electrical equipment. As DC load controllers they disconnect the load at a user-settable low voltage and reconnect at a higher voltage reconnect point. The Xantrex PowerHub modified sine wave inverter / charger is capable of delivering backup power to your house of up to 1440 Watts continuously with up to 1800 Watt surge for five minutes.Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. Xantrex Technology is a world leader in producing advanced power electronic products for the solar and mobile power markets. The majority of Xantrex products are manufactured to serve 12 Volt and 24 Volt DC (direct current) systems that require AC power.

Wow I would never use more than a 1000 watt inverter on a 12 volt system, even 1000 watts is pushing it. The C40 has a powerful microprocessor at its core which increases system performance and maximizes battery life. The ProSine is UL 458 listed for mobile applications (RVs or boats) and UL 1741 for homes in the United States. I already have a ComBox, so I am setting up an Ubuntu server, install emonCMS and attempt to feed Modbus data via TCP/IP.v=1542912875","options":["Title"],"media":[{"alt":null,"id":514784985228,"position":1,"preview_image":{"aspect_ratio":0. This digital meter only mounts as a remote meter (does not fit on front of charge controller) for the C35, C40, or C60.

They should be treated as lead acid, and can vent Hydrogen and Oxygen, and the container they are in (even a rubbermaid tote) should be vented to the outdoors. I want to isolate the batteries from the rest of the equipment in the cabinet and install an exhaust fan to outside to service both the battery section and the electronic section.C Series controllers are also CE compliant (European countries) and are designed to CTIK standards (Australia). The C40 has long been the mainstay of Xantrex's charge controllers because of it versatility and reliability. A unique feature of the C Series controllers is thier versatility, as they can work as a charge, load or diversion controller. As a Solar Charge Controller- When used as a solar charge controller, the C40 can control 12, 24, or 48Vdc array operation.

All those cell towers you see everywhere have VRLA batteries that would make most home RE systems look like a couple of AA batteries. Something that I came upon revisiting this is that SE provides Modbus via RS-485 and TCP/IP through their ComBox and Conext Gateway. My take on the above is that Xanbus is a proprietary CAN-bus implementation, and Schneider has implemented encryption keyed off their device serial numbers to prevent third part configuration and control. However if you were to say short out a cell, two, or more with say a wrench slipping while tightening a connection, you would not likely live through it as you and the building would be incinerated. The optional LCD digital display shows battery voltage, array amps and watts, cumulative amp-hours and a separately resettable "trip" amp-hour measurement.Adding batteries later is a bad idea, the used ones have "aged" and will quickly "age" the brand new ones. Xantrex, a subsidiary of Schneider Electric, manufacturers a range of components for the renewable energy, marine and mobile power electrical systems. It is capable of handling 40 amps at continuous duty and can handle current surges of up to 85 amps.