SanDisk 4TB Extreme Portable SSD, USB-C USB 3.2 Gen 2, External NVMe Solid State Drive, up to 1050 MB/s, IP65 rated for dust and water resistance

£139
FREE Shipping

SanDisk 4TB Extreme Portable SSD, USB-C USB 3.2 Gen 2, External NVMe Solid State Drive, up to 1050 MB/s, IP65 rated for dust and water resistance

SanDisk 4TB Extreme Portable SSD, USB-C USB 3.2 Gen 2, External NVMe Solid State Drive, up to 1050 MB/s, IP65 rated for dust and water resistance

RRP: £278.00
Price: £139
£139 FREE Shipping

In stock

We accept the following payment methods

Description

Get fast NVMe™ solid state performance featuring 1050MB/s 2 read and 1000MB/s 2 write speeds in a portable, high-capacity drive that’s perfect for creating amazing content or capturing incredible footage. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: The Extreme Pro is IP55 water and dust resistant and rated to withstand a two-meter drop, though we feel that is a very conservative rating. At 85 grams, the Extreme Pro has a solid and weighted feel to it. That, along with the smooth rounded silicone-coated edges, conveys an apple-esque quality. Also, that enclosure is made with an older Alpine Ridge TB3 controller, not titan ridge or newer like on some of these portable SSDs. So, its older tech. As for IOPS - what is the point of testing the device outside of its designed enclosure if it is forever going to be used in the enclosure? I can test portable SSDs' IOPS perfectly fine as they come. They are not going to be used as internal SSDs, only as portables. So, comparing the performance without the bridge chip they come with is irrelevant. And again, I've already reviewed the internal devices as linked above. ;)

SanDisk Extreme Pro Portable SSD V2 Review | PCMag SanDisk Extreme Pro Portable SSD V2 Review | PCMag

WD's flagships and Crucial's mainstream X6 offerings represent two ends of the pricing spectrum. At the same capacity point, they present an interesting view of the tradeoffs involved in achieving a particular price point - performance, consistency, BOM features, and value additions. This review looks at the features of the SanDisk Extreme PRO v2 4TB and the Crucial X6 4TB portable SSDs, along with an analysis of their performance numbers and value propositions. Introduction and Product Impressions Get powerful NVMe™ solid state performance featuring 2000MB/s 2 read/write speeds in a portable drive that’s reliable enough to take on any adventure. From SanDisk, the brand professional photographers worldwide trust to handle best shots on their toughest assignments. TB3 is more popular then USB 3.2 2x2 which is impossible to find in notebook and very rare in Desktops.

Introduction and Product Impressions

We devote hundreds of hours of rigorous testing to help make sure your drive is worthy of your best work — and so you know your precious files are in good hands. There are plenty of external storage solutions out in the market, but very few of them will be as durable as the Extreme Pro Portable SSD. It’s got great transfer speeds to keep you going, plenty of storage, and comes in a variety of storage sizes. SanDisk provides a generous five-year warranty, which we have also seen on other Western Digital products such as the 2020 version of the My Passport SSD. (WD is SanDisk's parent company.) Neither the name of the University of California, Berkeley nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

SanDisk 4TB Extreme Portable SSD, USB-C USB 3.2 Gen 2 SanDisk 4TB Extreme Portable SSD, USB-C USB 3.2 Gen 2

Save time storing and transferring data with the forged aluminum chassis that also acts as a heatsink to deliver higher sustained speeds. From SanDisk, the brand professional photographers worldwide trust to handle their best shots and footage. USB 3.2 Gen 1 (a.k.a. the old USB 3.0), typically good enough a ceiling for older external SSDs with SATA-based silicon, caps read and write speeds for external SSDs at about 550MBps and 500MBps respectively. While you can use the Extreme Pro V2 drive with any of these interfaces, buying it without provision for a Gen 2x2 interface would be like buying a Corvette for runs to the grocery store. Get extra peace of mind with a 5-year limited warranty 3 and a durable silicon shell that offers a premium feel and added protection to the drive’s exterior.

A Content Creator's Dream SSD\u2014With a Catch

seanwebster said:At that point you wouldn't be testing the actual portable SSDs as they are, you would just be testing the performance of the internal SSDs in that one enclosure. Thus, comparing just the underlying storage alone. You can't compare the performance or thermal characteristics of these portable SSDs without using the default enclosures and bridge chips. On a positive note, the drive comes with two 9-inch cables: USB-C-to-USB-C and USB-C-to-USB-A. That's better than an awkward converter dongle. The SanDisk Extreme Pro V2 supports the latest and fastest USB flavor (USB 3.2 Gen 2x2, also called SuperSpeed USB 20Gbps), which offers transfer speeds of up to 2,000MBps for both read and write when connected to a compatible USB-C port. It tested just short of that (1,909MBps read, 1,919MBps write) in our Crystal DiskMark 6.0 sequential read and write testing. Its scores were also a smidge under the speeds we recently saw from the Seagate FireCuda Gaming SSD (1,992MBps read, 1,967MBps write), which supports the same 2x2 interface. (See how we test SSDs.)

SanDisk Extreme PRO and Crucial X6 4TB Portable SSDs Review

The evaluation routine for direct-attached storage devices – portable SSDs, storage bridges (including RAID enclosures), and memory cards – all utilize the same testbed and have similar workloads with slight tweaks based on the end market for the product. Our testbeds have kept pace with the introduction of new external interfaces - Thunderbolt 2, Thunderbolt 3, and USB 3.2 Gen 2 via Type-C. In mid-2014, we prepared a custom desktop based on Haswell, which was then upgraded to Skylake in early 2016. A botched Thunderbolt 3 firmware upgrade on the Skylake machine meant that we had to shift to the Hades Canyon NUC starting in early 2019. This year, we have adopted the Quartz Canyon NUC (essentially, the Xeon / ECC version of the Ghost Canyon NUC) along with build components from ADATA Industrial - 2x 16GB DDR4-3200 ECC SODIMMs and a PCIe 3.0 x4 NVMe SSD - the IM2P33E8 1TB. Because all portable SSD are a box with internal off the shelves NVME SSD .. I am 100% sure you will find the same Version of SANDISK Extreme Pro as a stand alone NVME ... Also you need to tear down the External drives in each review to see which NVME SSD is in there ... it will also help you to determine TBW/IOPS if the external drive does not say just by discovering which NVME SSD they are using inside. Both drives support S.M.A.R.T passthrough. X6 does not indicate TRIM as an available feature. However, we were able to activate TRIM in Windows on NTFS volumes in both drives. Temperature monitoring and obtaining health status (in terms of TBW) are simple for both drives.Ars Technica's Lee Hutchinson confirmed suffering not one, but two 2TB Extreme Pros dying. After filling about halfway, each drive met a slew of read and write errors. When he disconnected and reconnected the SSD, it showed it was unformatted with the drive completely wiped, including its file system. Wiping and reformatting didn't help, and this happened with two different units.

SanDisk Extreme® Portable SSD V2 USB-C, USB 3.2 External

Prior to looking at the benchmark numbers, power consumption, and thermal solution effectiveness, a description of the testbed setup and evaluation methodology is provided. Testbed Setup and Evaluation Methodology The new SanDisk Extreme Pro v2 comes with some changes under the hood, too. A new ASMedia ASM2364 bridge controller communicates with the host at faster speeds because it has twice the PCIe lane count as the ASM2362, which means twice the throughput. Not only does it maintain a speedy 20 Gbps link while connected to a PCIe 3.0 x4 SSD, but it also features link power management to reduce idle power consumption. The controller also supports Trim to keep performance predictable. Editor’s Note, August 17, 2023: As recently reported in Ars Technica , a critical mass of users on SanDisk’s forums and Reddit have reported failures of some SanDisk Extreme, Extreme Pro, Extreme V2, and Extreme Pro V2 SSDs, resulting in data loss, as well as the drives becoming unreadable/unmountable. In May, parent company WD released firmware updates for the 4TB SanDisk Extreme, as well as the 4TB, 2TB, and 1TB Extreme Pro models, plus the 4TB Western Digital My Passport, but complaints continue. We are doing our own stress-testing of the sample drives we originally reviewed. As of today, however, we no longer recommend buying any of the aforementioned SSDs, until we are satisfied the issue has been resolved. ( A class-action suit has been levied against WD surrounding issues with these drives.) We have left our original review in place here for reference.] The specifications of the testbed are summarized in the table below: AnandTech DAS Testbed Configuration

Get peace of mind when you’re out in the world thanks to a 5-year limited warranty 3 and a forged aluminum chassis-silicon shell combo that offers a premium feel and added protection. The evaluation scheme for DAS units involves multiple workloads which are described in detail in the corresponding sections.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop