We manufacture PVC angle trim in our UK factory and we are a member of the Made In Britain organisation. They enable buyers and consumers to identify a wide range of British-made products.

Our plastic strips are manufactured from uPVC although it is important to point out the difference between the plastic material we use and the plastic material used by the double-glazing and widow industries. In those industries, additional stabilisers are often added to the uPVC, whereas our material is standard uPVC. It depends on whether you choose rigid plastic strips or flexible plastic strips as to how bendable the plastic strip will be. This white corner trim is used by many different sectors on both internal and external corners. White corner trim can provide edge and corner protection, as well as being a solution to hiding damaged or uneven surfaces.As we have so many shapes and sizes, we wrote a blog on how to choose the correct plastic profile for your project. We wrote this blog specifically for our plastic angles, but most of the blog also applies to plastic U channels.

Plastic Angle Trim is often used as an edge strip because the shape makes it suitable for edging 90-degree corners. Often this will be used as a plastic edging strip on a wall, but it could also be other surfaces including boards, panels, sheeting and glass. Other forms of PVC edging strip Plastic edging is available in several different designs. This includes flat bar strips, plastic lipping, plastic channels, plastic angle trim, plastic J channels and capping. They will all cover edges but have different numbers and styles of faces depending on your own particular project requirements. You are very welcome to request samples of PVC strip if you are unsure about exactly which plastic flat strip you need. You may wish to see the colour, the different type of material, the width or the edge style. Most of our flat plastic strips have square edges, but we also have a few sizes with round edges. This means that two of the edges of the plastic strips are slightly rounded. Square edge plastic stripsThere are quite a few reasons why we think you should use MKM Extrusions as your supplier of PVC channel. We are an experienced plastic extrusion manufacturer based in Britain and have been trading since 1983. We have held both Quality and Environmental accreditations for many years. We only sell direct to customers and do not have any suppliers or distributors, which means that our prices are very competitive. We manufacture plastic extrusions 24 hours a day during the week which means our delivery times are fast. We have customers from almost every sector who use our right angle PVC trim, our range of customers is very broad. Sectors that use our plastic angle trim include fitout, construction, signage, builders, architects, hoardings, film studios, refrigerated vehicles and shopfitting to name but a few. Typically it is used as corner trim and corner protection because the angle of the trim is 90 degrees so the trim works well on corners and edges. But it can also offer many other solutions. Using a plastic angle as a corner trim We have 45 different sizes of white plastic angle trim, in sizes as small as 5mm going up to the largest at 100mm. Short pre-cut samples are available upon request which are sent out by post. As well as covering damage, corner trim can cover unsightly gaps. These profiles are high quality and will provide a professional finish to your project Using it for plastic edging You are very welcome to get in touch if you require samples of PVC channel to help you decide which size of PVC U channel trim is suitable for you. Plastic U channel trim – available colours