https://geni.us/Cat6– A drum of Ethernet cable – probably either Cat5e, Cat6 or possibly even Cat6a, it will depend on your use case but we won’t get into the differences in this article Well, there’s now a better way using a slightly different type of RJ45 plug and a different crimping tool. So, this guide will show you the easy way to fit an end and make up your own ethernet cables from start to finish.

Although I got pretty good at it, I’ve still lost count over the years of the number of times I’ve had to snip an end off and start again from scratch, wasting a plug which can’t be used again and making the cable shorter and shorter with each failure. Less Durable: The pass through design makes copper wires exposed to oxygen, so the RJ45 connectors are easy to damage. Better Connection: Pass through RJ45 connectors have a higher success rate of successful termination and a perfect termination can achieve a more stable and reliable connection. Today, Ethernet networks are commonplace in both domestic and professional environments. A network is simply several interconnected devices that are capable of sharing data between one another. Home networks, for example, are usually based around a router or modem, connected to various other devices and sharing out data. This might include PCs and laptops, smart TVs, mobile phones, games consoles, media servers, printers, and so on. A domestic setup of this kind is an example of a LAN (Local Area Network). The name comes from the fact that all devices linked to it are close to the others, typically within the same building. Ethernet cables are terminated with RJ45 connectors. It is known that there are various RJ45 connectors, among which pass through RJ45 connectors have become very popular these years. So, what do pass through RJ45 connectors look like and why are they so popular? We’ll take a closer look at differences between pass through and non pass-through connectors in this article. Pass Through vs. Non Pass-ThroughNon pass-through connectors are standard ones used to terminate Ethernet cables. But if you are network beginners, you may find it a frustrating thing to install non pass-through RJ45 connectors. Different from standard RJ45 connectors, pass through RJ45 connectors allow Ethernet cable wires to pass through and out of the whole body. So, you can easily make sure these wires are aligned and the color sequence is correct before crimping. Compared to traditional RJ45 connectors, pass through connectors have their own pros and cons. No more load bars means less waste and frustration. The ability to see the conductors come through the front of the plug allows you to verify the correct TIA 568A or 568B color sequence which minimizes bad terminations. REVISION: The initial poor review (below) was 100% due to my error. The connectors DO work well. The pass-through design is WONDERFUL. Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer sheath of cable should sit inside the plug as far up as possible. Connector Type: Choose the correct type according to your requirements (straight-through, crossover, rollover, or keyed).

Knowing how to wire an RJ45 connector plug means that you can cut your Ethernet cable to custom lengths. This is handy for neatly managing cables or creating very long runs

Features

Most often, you will be able to identify the type of RJ45 Connector you need by looking at the devices and cables that you are connecting. For example, a straight-through connector is needed if you are connecting two computers. What is the best way to crimp an RJ45 Connector? There are several variations of RJ45 Connectors, each designed for different applications. The most common types are: