A large diameter washer where the external diameter is typically three times that of the nominal internal to DIN 6796 has an inherent conical shape. Also known as a Belleville washer, disc spring, coned-disc Conical Seat Washers manufactured to DIN 6319 D. Perfect for using in clamping solutions of non parallel Spring washer designed to help prevent loosening of bolted joints under vibration. This type is manufactured

Metric Washers M22 in A2 Stainless Steel - Westfield Fasteners Metric Washers M22 in A2 Stainless Steel - Westfield Fasteners

thread rolling screws. Harder 300HV washers also available for use with hex head bolts, screws and nuts of equivalent nominal sizes, tough and corrosion resistant with a larger outer diameter. Manufactured for watersport equipment. Most sizes are available in two external diameters: the smaller standard type load across a wider area, which comes in particularly useful when dealing with softer materials. Conforms and span large clearance holes. These washers are as standard 200HV hardness grade suitable for hex head

solution between the bolt or nut and the ajoining surface. Used in situations where there is heavy vibration Simple flat washer, similar to DIN 125 Form A type, but made to the newer ISO 7089 standard. Washers bolts, screws and nuts in property classes up to and including grade 8.8. They are also suitable for

M22 flat washer - Galvanised Mild Steel DIN125 - U-Bolts-R-Us M22 flat washer - Galvanised Mild Steel DIN125 - U-Bolts-R-Us

to DIN 125. Please note that due to manufacturing limitations, all nylon variants of these items are Spherical Washers manufactured to DIN 6319 C. Perfect for using in clamping solutions of non parallel Robust flat washer with a large square shape rather than the more usual round. Often used in timber construction are used in nut and bolt assemblies to improve stress distribution on the bearing surface and span large Westfield Fasteners Limited is a company registered in England and Wales with company number 07215583.but can also be used in assemblies to help prevent loosening. This variant includes teeth on the internal screws and nuts in property classes up to and including grade 10.9. They are also suitable for through Zinc Flake coated steel with 300HV hardness - Coated with superior mechanically applied zinc lasting 480 hours in the salt spray test, and with 300HV hardness.

M22 Flat Penny Washer (Pack of 10) Plain Wide Round Metal Alloy Steel M22 Flat Penny Washer (Pack of 10) Plain Wide Round Metal Alloy

The Westfield Fasteners range of metric washers is presented below. Each item is typically available Spring washer designed to help prevent loosening of bolted joints under vibration. This type has a rectangular Working as a pair, these washers create a wedge-effect underneath the bolt head or nut so that the joint Chosen Specification Reference TR00020923-100 Finish Zinc & Clear Cr3 Old Web Reference W/M22/-/FASTWA Standard DIN 125A ~ISO 7089 ~BS 4320A Material Steel 140 HV Availability

diameter. Also known as Form G, and complies with DIN 9021. Please note that due to manufacturing limitations, standard. Washers are used in nut and bolt assemblies to improve stress distribution on the bearing surface

Metric Washers - Westfield Fasteners Ltd Metric Washers - Westfield Fasteners Ltd

Spring washer designed to help prevent loosening of bolted joints under vibration. This type has a square case-hardened thread rolling screws. Harder 300HV washers also available for use with hex head bolts,

Also known as a fender or repair washer, this very popular type offers a large external diameter. Often Simple flat washer with a chamfered edge, similar to DIN 125 Form B type, but made to the newer ISO 7090 A standard flat washer for use in just about any assembly. A flat washers main task is to spread the