De-Solv-it consumer products are developed and tested with industry professionals before emerging as a household product. Once these products have passed the rigors of customers such as Disney®, Holland America Line®, Marriott® and more, we allow them for home and expanded professional use. Some versions of De-Solv-it products clean everything from gum in household carpet to residue on massive earth movers with no harmful vapors or hazardous components . PRO CONTRACTORS’ SOLVENT is a stronger version of CITRUS SOLUTION, removing even tougher challenges including caulk, cured silicone, water seal, roofing tar, asphalt and fresh expanding insulation foam. Can I use CITRUS SOLUTION to remove protective paper adhesive to clear acrylic plexiglass? + Please note that, by itself and unlike abrasive cloths, Pro Contractors’ Solvent WILL NOT ETCH PLASTIC as it is non-abrasive, non-corrosive and will not harm most water tolerant surfaces including dry paint, clear coats and glass. Can I use CONTRACTORS SOLVENT on heated surfaces such as engines, equipment and power tools? +

Yes, even to remove wet oil-based paint and stain. YES. PRO CONTRACTORS SOLVENT will not harm dry paint or clear-coat finishes. This product is an excellent wax remover so after removing asphalt, grease and tar, you may want to rewax your vehicle. To clean interior stains, use the instructions for carpeting and upholstery. PRO CONTRACTORS SOLVENT may also be used on vinyl and non-tinted glass since tint is usually applied with adhesive. Be sure to wash PRO CONTRACTORS SOLVENT off vinyl and rubber surfaces after use. Can I use PRO CONTRACTORS SOLVENT™ to remove protective paper adhesive to clear acrylic plexiglass? + For EXTRA porous hard surfaces such as these, first apply PRO CONTRACTORS SOLVENT in an inconspicuous area using the techniques below. Measure this success before applying PRO CONTRACTORS SOLVENT on a greater scale. Wash the fabric using a pre-wash programme in accordance with manufacturer’s instructions.Add slightly more detergent and use the highest temperature setting recommended for the fabric. Wash the surface with cleaner using LOW pressure spray nozzle. On vertical surfaces, start at the bottom to prevent streaking.

Australian Made and Owned

a>