Set the microwave power by pressing the ‘Power’ button. Select the time by turning the dial and pressing ‘Start’ to confirm. If you want to pause the cooking to turn over or stir contents, simply open the door, then close again and press the ‘Start/+30Sec/Confirm’ button to continue the cycle. The turntable makes sure the heat is distributed evenly. When it's not working, the microwave cannnot be properly used. Have it repaired.

The buttons will ‘beep’ if they are pressed correctly, if not pressed correctly they will not ‘beep’.AUTO-COOK SETTINGS - Make your time in the kitchen a little bit easier by choosing from one of the 8 pre-set options to cook your food perfectly. The component that produces the microwaves is called a magnetron, if food is not being heated or is 'luke' warm then it is likely this component has developed a fault.

When the time comes for cleaning, you can remove the glass turntable and either wipe it down easily with a cloth or pop it in the dishwasher.Burnt on food debris in the microwave, on the wave guide and the behind the wave guide can cause the microwave to 'spark'. This is because burnt on debris can be focused on by the microwaves and spark. For even defrosting results, ensure you turn the food over during the cycle. Defrosting generally takes longer than the cooking time of food. Automatic defrost settings– All you have to do is input the weight of the food and the microwave selects the ideal defrost time. You can set your microwave to start cooking at a pre-set time, without the need to be present to input the programmes. Make sure your food is in the microwave and prepared when you programme the pre-set function. Turn the ‘Timer/Weight/Auto Menu’ dial to choose 80% microwave power until the display shows ‘P80’.