X-Treme Tape is great for sports grips and tool handles, wire harnesses, cable wraps, boat and Marine applications. Continue wrapping Rescue Tape around pipe by overlapping 50% onto itself so that ½ the width is covered with the next wrap. The first and last wrap should completely overlap onto the previous wrap for a complete bond. Additional layers may be necessary to repair the leak, and the same process should be used over the previous layers. Rescue Tape works on either side. The more Rescue Tape that is wrapped around the pipe, the stronger the pipe repair.

Rescue Tape can be easily removed by cutting, further minimizing downtime when a permanent pipe repair is being made.

About Bond It

The leaking pipe has been successfully repaired with Rescue Tape industrial pipe repair tape, and holding strong at almost 300F degrees” Advantages to Rescue Tape Pipe Repair compared to other Pipe Repair products: Repositioning Rescue Tape is only appropriate in the first few seconds after wrapping. Attempting to reposition Rescue Tape after 1 minute or longer is not recommended. Rescue Tape is not reusable; however, additional Rescue Tape can be applied over project at any time in the future. As one of the younger members of the team I don’t remember a kayaking world without tapes. They are a core part of a sensible rescue kit. However when chatting to some of the more seasoned members of the team, that wasn’t always the case. To find out more about the rise of safety tapes we asked our good friend ChrisEvans,LeadPaddleSportInstructoratPlasYBrenin. Why have open tapes become so popular over the last four or five years?

X-Treme Tape is so diverse that it can be used for permanent or temporary repairs to just about anything. Rescue Tape can be applied over any surface or pipe material, and even over a wet, dirty, greasy or oily pipe. Rescue Tape Pipe Repair has essentially a “maximum” stretch. It is important to stretch Rescue Tape to its maximum to avoid having the leak create a bubble.In the past, modules suffering in that manner had to be swapped, which may be no easy task if the power class of the new module needs to be the same as that of the device it is replacing. If voltage or current differs on a replacement panel, it cannot simply be integrated into an existing string and new electrical layouts need to be made, which involves planning and engineering work.