The oil comes with a fuel stabilizer that preserves the fuel quality in the engine. This oil got a synthetic blend which makes the oil suitable for both home and professional use. What is best about this HP SYNTH 2-CYC OIL is, it meets JASO-FD certification, which means, not only the Husqvarna chainsaw, this very oil can be used on all kinds of Husqvarna products.

Two-cycle engines and four-cycle engines are both used in mechanical equipment, but the type of equipment determines the better engine to use. Where four-cycle engines are commonly used in larger applications such as automobiles, motorcycle, boats and larger engine applications, two-cycle engines are often used in smaller engine applications such as lawn equipment and scooters. It is widely accepted that the standard is adequate to the intended intent. The low revving older trail, farm and early scooter engine style can run all day on these oils although there are generally worse emissions than more advanced 2-stroke oils. Semi-synthetic Two-stroke or two-cycle engine oils are special motor oils that are designed for use in two-cycle (two-stroke) engines. When using an oil for a two-cycle engine, it is important to use the correct two-cycle oil or else it could damage the engine due to the differences between a two-cycle and four-cycle engine. https://cdn.opieoils.co.uk/images/variants/large/castrol/castrol-power1-racing-2t-fully-synthetic-2-stroke-motorcycle-engine-oil-1litre-1.jpgYou can also buy oils designed specifically for 2t-engined scooters, like the Putoline TT scooter which is suitable for premix or injection scooters. This is one of the best-selling oil for the chainsaw, and it is a set of six oil bottles. We are presenting the Echo 6450001 power blend oil that can seamlessly blend with 8-octane gasoline and the gas-oil ratio is 50:1. Using this mixture on the chainsaw engine will ensure that it performs well in every situation. And increases the lifespan of the engine as well.

Today’s cheap two-stroke oil is far better than the quality two-stroke oil of 30 years ago. Expensive two-stroke oil might be deemed unnecessary by some, mainly because vintage or classic motorcycles don’t rev to the same high rev ceilings as modern machines but if you can afford it, go for a quality brand like Castrol’s A747.

Best Two Stroke Oils by bike type

With a wide variety of exciting features, the Maxima (23964) Castor 927 2-Stroke Premix Racing Oil– 64 oz is another one of the high performing 2 stroke motorcycle oils you can use on your motorcycle. Because fully synth oils are very good at dealing with heat, they are good for engine that run very hot and engines that don’t have very good cooling systems (like many scooter engines). However, the Royal Purple 04311 HP 2-C High-Performance Synthetic 2-Cycle Oil is also quite pricey. Firstly, you should never run your motorcycle on two-stroke oil that’s designed for a hedge strimmer or a chainsaw. It just won’t be able to keep up and a few miles down the road, your bike will seize.

https://cdn.opieoils.co.uk/images/variants/icon/castrol/castrol-power1-racing-2t-fully-synthetic-2-stroke-motorcycle-engine-oil-1litre-5.jpg Petroleum-based 2-stroke oil is “natural” in that it is made from fossil fuels – many 2-stroke enthusiasts refer to it as dino oil. While it provides adequate lubrication to the engine while it’s running, and aids in appropriate combustion, petroleum-based oil also leaves behind significantly more deposits than synthetic oils. Deposits range from gummy build up in valves to grimy deposits on spark plugs. Additionally, petroleum-based products have higher emissions than their synthetic counterparts. This is partially caused by the need for richer mixtures, because petroleum-based products have solvents to provide miscibility—the ability to mix with gasoline, and solvents are not lubricants. Synthetic 2-stroke oil products have lower deposits and emissions largely to having a lower ash content, and some, like AMSOIL recommend leaner mixtures (so you use less). For these reasons, a number of manufacturers now recommend synthetic oil for 2-stroke engine use. What is synthetic two-stroke oil suitable for? Vegetable oil, or castor oil, are naturally derived vegetable-based oils used forever and a day. When mixed at high oil to fuel ratios e.g. 20:1 and even higher in petrol, these oils have good lubrication potential, but their inability to remain mixed is a less than desirable attribute. For fast revving engines such as karts and smaller capacity motorcycle engines, vegetable-based oils often have what is called ‘high cling volume.’ Because of the high volume of oil and its normal viscosity, it appears to bind at intense rpm (15,000 +) to the bearing and piston skirts fending centrifugal force effects and aiding in heat dispersion.Further, the Lucas Oil 10115 Semi-Synthetic 2-Cycle Oil has made a name for itself for the smokeless burn, which is due to the mineral oil synthetic blend it features. As a result, you can expect little to no corrosion and carbon deposits. A key difference between a four-cycle engine oil and a two-cycle engine oil is that a four-cycle engine oil does not mix the fuel and oil. Four-cycle engines operate in the following manner: Some believe fully-synthetic oils offer a number of advantages over other oils such as resistance to oxidation and thermal breakdown. (22)

You need to understand the differences between 2 stroke and 4 stroke oils. The main difference, which most riders are unaware of, does not lie in the weight. The oil you buy will either be injector safe or premix oil. However just because an expensive two-stroke oil is better, it doesn’t mean you have to run the most premium one you can find.I do plan to write one about different oil viscosity, with info about suitable uses etc later this year. I live in the Philippines. I would like to hear a recommendation from you which oil should i choose? I have a 200cc china bike, replica of Gilera VC200. Here’s the specs. However, with many benefits and performance attributes, the Lucas Oil 10115 Semi-Synthetic 2-Cycle Oil is quite pricey. Engine oil works hard. It reduces friction, helps manage engine temperature and protects the hardworking