Capacity: 16GB (2 x 8GB) | Memory Type: 288-Pin DDR4 SDRAM | Memory Speed: 4,000MHz | CAS Latency: 18 | Timings: 18-22-22-42 | Height: 46.5mm/1.83"

You’ll also want to look at the specs on your motherboard and figure out the maximum memory speed it can support. Spending some extra money on 3,200MHz RAM is completely pointless if your motherboard can only support 2,400MHz, for example.Below we've broken down a few things you should consider in your search for the best RAM kit and how much memory you’ll need for PC gaming. Of all the high-volume enthusiast brands (Silicon Power isn’t there yet), Team Group stands out as being the one that relies upon Asus to reach competitive performance levels, and that’s why we can only recommend this kit to Asus motherboard owners. With the same 1.4V DRAM voltage, we could get the Delta RGB DDR5-6000's timings down to 38-38-38-78. However, the memory utilizes SK hynix M-die ICs, so there wasn't a huge margin for optimization. Bottom Line I have completely uninstalled Aura Sync and MSI center because I know you need to manually uninstall all components, and I have reinstalled all of those listed programs countless times. As of right now I only have the standalone Dragon Center app, because that's the only thing that will control everything else. The basic thing you need to know is the lower the numbers are the faster your memory is. However, you should also know that faster memory speed results in higher latency. So you should also be wary of RAM that's incredibly fast, but throws in a lot of latency that negates it.

No issues with Team Group booting, but XMP II profile that I ran may not work from the box even with Apex z790 Encore or white Apex board. I am running 6933mhz on Z690 Aorus Master right now with CL34-42-42-47, with this A-Die, probably can go lower than 47 on tRAS, but I have been running stress tests for week and a half. It takes a long time to test for 8+ hours each night. Supposedly G.Skill and Team Group gets dips on the first set of Hynix A-Die chips, and everyone else follows. They don't make them, but they get the best creme of the crop samples. Oddly enough G.Skill runs hotter than Team Group. Unless you have proper cooling, don't even buy 24gb x 2 (8200mhz) kit.If you don't know how to manage voltages properly, you will degrade your CPU or fry it. You can also fry motherboard or the ram itself. Multiple compatibility verifications with mainstream DDR4 motherboards to make sure its stability with all motherboards on the QVL(Qualified Vendor List). Therefore, you wouldn’t’ have to worry about compatibility issues when purchasing high speed memory. Unfortunately, the numbers and letters (0D=8H 35N) on the power management IC (PMIC) don't correspond to any known device, so we dumped the SPD via CPU-Z. Assuming that TeamGroup filled out the field correctly, Richtek should be the manufacturer behind this PMIC.

On M-Die I was running 6700mhz at faster timings, and was nearly matching 6933mhz in terms of latency, not the throughput of the A-Die though.Besides of winning the memory lottery, also remember...your Apex Z790 is not made the same. It can easily be worse than another Apex Z790 I don't understand why they wont show up in Dragon Center because they are listed as a compatible product, and the DRAM box has the Mystic Light logo on it to boot. Teamgroup runs WAY cooler than G.Skill 6400mhz kit that I have (even at lower voltage of 1.35v), and Team Group is at 1.45v. Patriot Viper 8000mhz runs WAY hotter too. My Viper 8000mhz kit did not bin proper, I could not stabilize even 7800mhz. It refused to boot on 8000mhz With low working voltage 1.2~1.4V from DDR4 VULCAN , it is not only energy saving but it can also reduce the temperature and the heat generated to offer the high speed running memory a stable and long time operation. I have a MSI Z490-A Pro mobo and for whatever reason I absolutely cannot find a solution on how I can control the RGB's on my Delta DDR4's. Mystic Light worked with everything, (As far as RGB components go: Hyper 212 CPU cooler, LED Strips, Sirius Loop Fans) everything EXCEPT the Delta DDR4's. For a short period of time I was able to control them using Mystic Light or Aura Sync, I can't remember which. I think Aura Sync. But then they randomly stopped showing up in the program.