To adjust brightness, you just slide your finger up or down the touch line and the connected light follows your input. The thin touch line has an indicator of the current brightness set. It also remembers where the brightness was set when turned off, showing it with a small dot on the line. Wall Installation The most important requirement when installing a dimmer switch is a neutral wire, because a lot of modern dimmers require a neutral wire. Homes built prior to 1985 typically won’t have a neutral wire unless the wiring has been updated and brought up to code, so this is an important consideration. With a rating of 250-350W for dimmable LED or incandescent/halogen bulbs, our dimmer modules provide ample power to control your lights effectively. Whether you have energy-efficient LED bulbs or classic incandescent/halogen bulbs, Samotech SM323 v2 Zigbee Rotary dimmer modules are ready to enhance your lighting experience.

Set the ambiance just right with our pioneering minimum brightness setting, allowing users to predetermine the lowest light intensity. And for those times when dimming isn’t needed, the SM311 can double as a switch with non-dimmable sources when connected via a 3-wire system.The SureSlide from Leviton is a slide dimmer first and a light switch second, which is why it’s our favorite slide dimmer switch. Dimming is provided by a large sliding bar that’s easy to operate. It also includes a toggle switch, so you can set your desired dimming level, turn the lights off, and then return directly to your chosen illumination setting the next time you turn the lights on. It works with a variety of bulb types, including compact fluorescent, LED, and incandescent, and you can also install it in both single-pole and 3-way configurations. Dimmer switches sometimes need a larger wall box than the switch you’re replacing, and you also need to consider the kind of bulbs you’re using and other factors. By automating your lights, you can effectively reduce energy costs in your home. Our SM323 v2 Zigbee dimmers offer noise-free trailing edge dimming, ensuring optimal performance for modern LED bulbs. Say goodbye to noisy dimmer light switches and enjoy smooth dimming experiences. This is primarily a single pole switch, which means it’s easiest to use in a configuration where it doesn’t share control of the lights with any other switches. It is possible to use in 3-way installations with a mechanical switch, but that takes a little extra work. It requires different wiring from a traditional dimmer switch, so you’ll have to discard your preexisting knowledge and pay close attention to the instructions if you’re familiar with how 3-way wiring is supposed to work. The hidden benefit is that this switch is actually designed for multi-location dimming in up to 10 locations if you use Maestro Companion dimmer switches instead of traditional dimmer or mechanical switches. Most smart switches depend on the presence of a neutral wire to supply energy to their radios, but many homes built prior to the 1980s don’t have a neutral wire in every box. GE Cync and Lutron Caséta are among the few smart switches that don’t depend a neutral wire.

One of the key advantages of our new v2 dimmer module is that it can be wired with or without a neutral wire, making it compatible with any existing UK and EU wirings. This eliminates the need for complex rewiring processes and ensures a hassle-free installation experience. In just 10 minutes, you can have your smart dimmer module up and running. As of this writing of this article, the MoesHouse Touch Dimmer Switch is officially supported in all ZigBee Integrations in Home Assistant: ZHA, ZigBee2MQTT, Deconz. In this review, we will examine its compatibility with each integration. ZHASuperior RF Range: Offering an impressive range of up to 30 meters, the SM311 ensures you enjoy seamless control, irrespective of where you are in your home. Optimal dimming performance: Achieve smooth and precise dimming of your LED bulbs, ensuring the perfect lighting ambiance for any occasion.

There are no 4-way dimmer switches, but this kit from Leviton is functionally what you’re looking for if your goal is to operate and dim your lights from three or more locations. The reason 4-way dimmers aren’t possible with traditional switches is due to the way that light switch circuits work, and this kit gets around that problem by not using a traditional light switch circuit. Instead, it uses a primary switch, a companion switch, and a plug-in bridge unit that allows them to connect wirelessly. With a wireless control outlet, you can raise the intelligence of any lamp that you already own. The outlet can be controlled via remote or via app, and anything that’s connected to it can be turned on or off remotely. This makes getting started with smart lighting very easy – simply try out a few smart outlets in your most well-lit room and you’ll fall in love with smart lighting in no time. This high wattage Legrand switch is ideal for 3-way lighting setups. It’s rated to work with loads up to 700W, works with both incandescent and halogen bulbs, and it doesn’t need to be derated when installed in a multi-gang application. That means it’s capable of operating at full capacity regardless of whether it's installed in its own wall box or in a multi-gang box setup. It doesn’t work with either LED or CFL bulbs, so it isn’t the right choice if you don’t plan on using either incandescent or halogen lighting.

Install a wireless control outlet

Optimise Performance:To enhance compatibility with the ever-increasing range of lighting options now available to customers, V-Pro dimmers are programmable to offer a choice of dimming modes. In addition, users can set the minimum load level for the dimmer to optimise the dimming range of a particular lighting load. Additional features refine performance to providea stable light output across all brightness levels, both when the lights areswitched on and during operation.The V-Pro series also features a soft-start feature to improve the life span of both the LED lamps and the dimmer. The Cloudy Bay in Wall Dimmer Switch for LED Lights is a toggle switch with a small dimming slider, and it functions in both single pole and 3-way installations. The dimming slider is a little on the small side, but it doesn’t get in the way of the switch. It’s fully compatible with all Cloudy Bay LED light fixtures right out of the box, and it also includes a trim dial that allows you to adjust it to work well with other fixtures and dimmable LED bulbs. It comes with everything you need to complete the installation, including screws, wire nuts, and even a decorative wall plate.

Adaptive Load Management: Whether it’s resistive, capacitive, or inductive loads, the SM311 adjusts seamlessly, ensuring consistent performance. Installation is straightforward and can be completed in just about 10 minutes. It’s compatible with the wiring found in UK homes of any era, so there’s no requirement for a neutral wire. However, if a neutral wire is available, connecting it to the module is recommended for better control and stable lighting. Essentially, using the neutral wire negates the need for a bypass when using low-wattage LED bulbs. The Kasa app works with both Android and iPhone, and it allows you to operate the switch remotely as long as you have internet access, so you technically don’t even need anything but this switch and your phone to get started. It does work with both Alexa and Google Home though, so you can operate the switch with voice commands if you have a compatible smart speaker. Smart home integration also lets you include the switch in daily routines, like turning the lights on or adjusting the illumination level at dusk. HomeKit News is not in any way afflilated or endorsed by Apple Inc. or any subsidiary companies related to Apple. Samotech SM323 v2 dimmer modules offer a convenient and efficient solution for upgrading your lights to a smart system. With a wide compatibility with various Zigbee hubs, energy-saving automation capabilities, and seamless integration with your current lighting infrastructure, our dimmers provide a comprehensive and user-friendly solution for modernizing your home lighting. Enjoy the convenience of remote control, smart automation, and effortless installation with Samotech dimmers. Comparison ChartIf you already have a smart home, or you’re in the process of setting one up, this smart dimmer switch from Kasa will make an excellent addition. Installation is simplified by detailed interactive instructions in the Kasa app, it works with several smart home ecosystems, and it connects directly to your wireless network so you don’t need to worry about buying and setting up a separate hub. Lutron’s Aurora Smart Dimmer prevents a conventional toggle switch from shutting off the power to any Philips Hue smart bulbs that connected to the switch. It can also wirelessly control those bulbs, including dimming them by rotating the knob. Note: Official TuYa integration is cloud dependent! This dimmer is not yet supported in the Local Tuya integration. I am advising against the Wi-Fi variant, because this dimmer carries an official TuYa firmware and you would have to use the official TuYa integration to use it with Home Assistant. If this is not an issue to you, feel free to get the Wi-Fi version. Upgrade your lighting system effortlessly with our smart dimmer modules, designed as a direct replacement for traditional “dumb” dimmers. With this innovative modules from Samotech, you can easily transform your lights into smart devices, enabling both physical and remote control through a mobile app. The Samotech SM323 v2 Zigbee modules are compatible with Philips Hue bridge, Home Assistant, Homekit, Smartthings, Echo Plus, and many more.