For most top fixing toilet seats, the seat and hinges are supplied separately and fitted as described above, however with a few kits, the hinges come fitted to the seat. Have some anti-bacterial cleaning spray to hand for cleaning the pan when the older seat is removed and before the new one goes on. The same cleaning agent can then be used when washing your hands after the job is done – assuming you are not sensitive to such cleaning chemicals. Always test for this, if you are not sure or have not used the product before. The bottom fixing is the traditional way to fix a toilet seat to a toilet and because of this they are the most common. However if the hinges you have feature adjustment then they will need to be positioned and adjusted correctly so the seat sits in exactly the right place on top the pan before the screws are tightened.

2 Replacement Toilet Seat 11cm L- Shape A13 Adjustable Hinges

Toilet seat fixings tend to be slightly different between manufacturers and due to this there are quite a few, however despite this they can all be broken into 2 different types; bottom fixing and top fixing. Bottom Fixing Toilet Seats This is a very good and well thought out solution for this eventuality and saves having to withdraw the pan from the wall, where re-sealing is difficult. The most common type of toilet seat found in homes across the UK is the plastic toilet seat due to it’s ease of cleaning and cheap cost both to produce and buy. Typical stainless steel toilet seat fitting kit that includes hinges and bolts How to Remove a Toilet SeatWith the lid and ring flat to the top of the toilet pan and the hige and hinge plate in the same position, lower it down on to the pan, slotting the studs through the fixing holes.

a Toilet Seat | DIY Doctor How to Fit or Replace a Toilet Seat | DIY Doctor

Over the years even the same shaped toilets have changed slightly in size so to allow for this and ensure that newer toilet seats will fit older toilets that may be slightly smaller, replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well.If you are thinking of changing your toilet from a close coupled to a low level toilet, take a look at the project we have on this, the old seat may not fit the new loo. When working with toilets, health and safety must come first! The toilet is obviously a place that can harbour harmful germs and is a source of potential infection therefore precautions should be taken before starting the job. To find the correct hole, loosely screw the studs in and position the seat in place and ensure all points above are met.

Fast Fit L SHAPE/SHAPED HEAVY DUTY STAINLESS STEEL TOILET

Wood was the traditional material used for toilet seat production and overall produces a good solid and long lasting seat. There are 3 main complaints that we hear about toilet seats, and generally they are easily dealt with (if your seat is of a reasonable quality): My Toilet Seat Slides, Wobbles or is UnsteadyThese kits are even easier to fit as all you have to do is insert the fixing plugs into the pan, position the seat in place and ensure it’s uniform to the top of the pan and then insert the screws and screw them up and you’re finished. Tips for Fitting Non-Standard Toilet Seats Some manufacturers utilise a metal fixing that uses a barrel nut positioned under the pan and the bolt is screwed down from the top.

Ideal Standard Seat Hinges - My Toilet Spares Ideal Standard Seat Hinges - My Toilet Spares

This bar has 2 blind holes and the method is to locate the spigots into the blind holes which also incorporate a tiny grub screw with an Allen head. A tiny Allen key is required to secure the grub screws to the spigot. When replacing a toilet seat you have to be absolutely sure that you are replacing the old one with one of exactly the same size so that all supports on the base of the ring sit flat on top of the pan The key parts of a toilet seat include the ring, lid, hinge, hinge plate and the seat fixing and are show in the diagram below. It is helpful to understand these parts and how they interact to keep the seat fixed on the toilet pan and stop it wobbling or sliding. Fine adjustments can be made by rotating the hinge plate; this ensures that the fixing bolts can be adjusted so both will go into their respective holes in the toilet bowl In pretty much all cases your toilet will be shaped to fit a particular type of seat so replacing a toilet seat will have to be done on a like-for-like basis so that you can be sure that it fits correctly.The method is to fit the rubber grommet into the pan holes and tighten the screw that engages with the nut and as one tightens, the nut is drawn up by the screwing action that expands the rubber grommet, making it tighten within the hole in the pan. Typically the toilet seat is fixed to the pan by two long screws, one end runs through the base of the hinge and then through the pan using the holes supplied by the manufacturer. A washer and nut are then added and tightened from underneath that then holds the seat in place. With these measurements you can then make sure that you get the right sized toilet seat. Safety Precautions When Working Around Toilets Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward There are quite a few different shapes of toilet around today and many different types of toilet seat to match.