Stiffening fabrics are useful to fashion designers and sculptors. Artists and other crafters make use of fabric stiffeners for their art. If I was using a brush it would be Mod Podge Stiffy, because it keeps the fabric from fraying when cutting and can be used for so many different projects. This format allows you to layer the paper by adding more of the mixture, then adding another piece of paper before coating that new layer. Some Final Words Press the damp material with your iron. Make sure you use a heat setting that is safe for your material. Select the pieces of fabric you intend to stiffen. For instance, if you want to pad the cuffs or collars, keep them separately from the rest of the fabric.

This interfacing does not bond to the fabric so it needs to be sewn into place around all the edges to prevent it shifting and bunching. For clothing, smooth the damp fabric flat onto the ironing board and then iron it to set the hairspray stiffly, like starch!

There are several commercial products on the market to help you stiffen fabric for crafts. The advantage of commercial spray stiffeners is convenience, but the cost can increase dramatically if you are doing larger volumes of fabric. Large clean firm surface to iron on. You may like to protect the surface with a folded sheet or towel)

Measure one teaspoon of gelatin for every sixteen ounces (2 cups) of hot water. You will need enough water to easily cover your fabric, so measure accordingly! There should be some fabric stiffeners that can’t wash out and those would fall into the category of glues and drywall paste. Then do you really want to wash the stiffener out? Is Fabric Stiffener Waterproof?This has been one of the earliest methods of stiffening fabrics. Many homes made DIY fabric stiffeners from cornstarch, even before modern fabric stiffeners. That said, you can create a semi-permanent stiffness for various crafts and artistic projects using spray starch! If you’re working with synthetic fabric, you can get the same result by using an alternative spray product called sizing. Cut a small scrap of the interfacing and your material. Do a test run with your iron to make sure the heat and the interfacing adhesive do not damage the material. Find out how hot you can set your iron without scorching or melting the material.