Already know basics? Jump on the third step. We would recommend reading the manual to have some knowledge about the mitre saw.

Yes! We can cut 4×4 pieces with a mitre saw because the mitre saw has a wide motion range and you can easily tilt the head of the mitre saw. So, the cutting capacity of the device increases. Adjustable and extendable table width extensions, removable to put long panels, slabs etc. underneath. Because of the sliding and bevelling features on this saw, Metabo have been forced to construct the fence in two pieces. The top half slides out of the way to allow the blade to pass by, but it means the fence is thin and a bit wobbly. Compared with the solid sliding fence on the Bosch GCM8SJL it’s not the best. Kevyt ja kompakti Metabo KGS 216 M -jiirisaha. Halkaisijaltaan Ø 216 mm kovametalliterällä varustetussa sahassa on kestävä painevalettu alumiinirunko ja vetotoiminto leveille työstettäville kappaleille. Sahan käyttöä helpottavat mm. integroitu purunimuri, kirkas LED-työvalo ja verkkovirralla toimiva laserosoitin, jonka ansiosta sahauslinja on aina selkeästi näkyvissä. Työkappaleet ovat kiinnitettävissä puristimella joko edestä tai päältä. Sahassa on esisäädetyt lukituspisteet yleisimpiä sahauskulmia varten ja portaattomasti ulosvedettävä työtason jatke pitkien paneelien, lautojen ym. sahausta varten. Syvyysvaste helpottaa urien sahausta. Toimitukseen sisältyy kovametallinen sahanterä, 2 integroitua pöydänjatketta, katkaisuohjain, kappalepuristin, purupussi, työkalu terän vaihtoon ja kaapelikela. Tuotetiedot:

Verify the rotation direction of the saw blade. When viewed from the left (open) side, the arrow on the saw blade should correspond to the direction indicated by the arrow on the blade guard. Nemá délkový doraz, při řezání více menších kusů stejných rozměrů (řezal jsem asi 180 kusů dubových pásků 20x5mm a 15x5mm) je to na hlavu a je nutno si pomoct jinak Verify that the folding blade guard is functioning properly. It should move freely and automatically cover the saw blade when the saw is folded up to the starting position. It should also allow unobstructed access to the saw blade without touching other parts when folded down. We can easily cut different materials up to the depth of 65mm (2.5 inches). This depth is perfect for large construction work. It also cuts the fine pieces of large and hard timber material. A plus point is its cutting width is 12 inches.

Like the Bosch GCM8SJL, I would struggle to live with such a big saw in my small shed. The footprint is too big for me, so I’m forced to use it outside on my folding bench. If space isn’t an issue for you, then this is a perfectly good workshop saw that is also just about portable enough. The Metabo KGS216M sliding mitre saw is an impressive cutting tool that can help you cut the wood like a knife in butter. It has an amazing cutting capacity, a unique design, plus it gives precise angle adjustment. This mitre saw has a dual input voltage capacity of 240 volts, which enables you to cut different materials. Also, the motor output power of 1500 watts offers you great power for cutting different types of materials such as timber, plastic, etc. Featuring a powerful motor, allows you to use the cutter for a long period without any issue.Také mě zarazilo, že ne vždy dořízne spodní zadní hranu až do konce, stačí trocha pilin na pojezdu a prostě kotouč nedosáhne tak daleko, aby byl řez kompletní, ale skončí v 99%. Kvůli otřepům stejně řeším přiložením nějakého kousku dřeva za řezaný materiál, ale zarazilo mě to, stačilo by přidat 2 milimetry na pojezdu a bylo by vyřešeno.

The output power of 1500 watts increases the worth of this mitre saw. It provides you with a good power to cut different materials easily such as timber, plastic, and coated panels. Moreover, this high power also allows you to use the saw for the long term without any issue. You get a pair of table extensions that fit neatly onto the end of the saw bed, and the right-hand one has a flip-up stop on it. This will come in extremely handy for ganging up work if you need to cut multiple bits of timber to the same length. Test the operation of the saw blade manually by rotating it to different positions without touching other parts. The folding blade guard should provide unobstructed access to the saw blade without any obstacles. Ensure that the saw blade is securely tightened and does not vibrate or become unbalanced during use. Tighten the tension screw firmly using the supplied hex key.The cut depth is an ample 65mm (2.5 inches) which will cut a range of timber and some good size planks but will not cut through the larger construction size timbers. If this is for more finishing work and light construction it will be fine. There is also a depth stop feature allowing you to cut accurate groves. Place it at an angle you want it to be cut. There will be angle measurement on the mitre saw. You can adjust the wood piece accordingly. The most noticeable feature of this mitre saw is its versatility. This saw can cut various materials including wood, plastic, and coated panels up to different widths and depths and in different shapes. The KGS216M is a sliding mitre saw, giving it a good width of cut at 305mm (12 inches). This will cut through some serious sized planks with ease and has a nice smooth sliding action so you can get a great finish. Fokozatmentesen kihúzható asztalszélesítő mindkét oldalon célszerűen kialakított felfekvési felülettel és beépített vágási ütközővel