When you are ready to feed, attach the digital lid to the hot flask and tilt the flask sideways for a minimum of 5 seconds to ensure the water is still hot enough and safe to make a feed. The star on the digital lid should turn red.

Complete with a hot flask and innovative cool flask, the GoPrep Formula Feed Maker Kit will give you the freedom to make fresh formula feeds away from home in just two minutes*. Use the hot flask to store boiling water when you leave the house. When it’s time to feed your baby, transfer the desired amount of boiling water to the cool flask, add your formula, secure the lid and shake to mix the formula and start the cooling process. When the Tommee Tippee star on the LED digital lid turns blue, your little one's feed is the right temperature and ready to transfer into a clean, sterile baby bottle. With the water hopper in place (but not the filter) fill the hopper with 1 litre of freshly boiled hot water. There’s no denying that preparing a fresh formula feed when you’re out can be stressful. However, the Tommee Tippee formula feed maker is an expert at helping parents on their journey. The GoPrep Formula Feed Maker is specially designed to take the fuss out of feeding times.Take a look at the image below for more information on why the Perfect Prep Filter is the best for use in the Perfect Prep™ machine. It’s important to note that you should never use hot or warm water to clean your Tommee Tippee Perfect Prep Machine, as this can damage the machine and affect its performance. Always use cold tap water. Do not place your Perfect Prep Machine near any heat sources such as stoves or ovens. Avoid exposing the machine to direct sunlight or leaving it in a hot car. This can cause damage to the machine and affect its performance. Home Set Up Pre-made formulas should be used within 24 hours if they’ve been stored in the fridge, within 4 hours if in a cool bag, or within 2 hours if stored at room temperature. Does formula really go bad after one hour? Always wash your baby bottles and teats in hot soapy water first to remove as much milk bacteria as possible prior to sterilisation. Most bottles can be cleaned in a dishwasher (top shelf only) however they could be contaminated with other food debris so washing bottles separately in hot soapy water is the best method.

Before first use you need to run a cleaning cycle – which should take approximately 10 minutes. For hygiene and safety reasons you should clean your unit on a regular basis. The best bit about breastfeeding on the go is that you already have two of the most important components on your person – literally – at any given time! So once you’ve got your baby in tow, you’re pretty much set on the ‘preparation’ front. But take your time. Many new mums like to get things going well at home before they venture out. Once breastfeeding is well established you should start to feel much more comfortable at the prospect of going out and about. Using a clean cloth, wipe down the water tank to remove any debris or buildup. Rinse the tank with clean water and dry it thoroughly. Step 5: Prepare the Descaling Solution After descaling your Tommee Tippee Perfect Prep Machine, it’s important to run a post-cleaning cycle to ensure that any remaining descaler residue is removed and the machine is clean and ready to use.Descaling your Tommee Tippee Perfect Prep Machine is a simple process that can help keep it running smoothly and ensure that your baby’s bottles are prepared safely and hygienically. In this article, we will guide you through the steps you need to follow to descale your machine properly. We will also provide you with some tips on how to maintain your Perfect Prep Machine to ensure that it lasts as long as possible. So, if you’re ready to get started, let’s dive in and learn how to descale your Tommee Tippee Perfect Prep Machine! Understanding the Tommee Tippee Prep Machine There’s a lot to plan for the perfect feed. Tommee Tippee is an expert at helping parents on their journey. With the GoPrep Formula Feed Maker Set, you can take the fuss out of feeding times.

If you are using the Tommee Tippee Perfect Prep Machine to prepare baby formula, it is essential to keep the machine clean and hygienic. Descaling is an important part of maintaining the machine’s hygiene and ensuring that it functions correctly. First, make sure that your machine is turned off and unplugged from the mains. Remove the water tank and empty any remaining water. Fill the water tank with 1 litre of cold water and add a sachet of Tommee Tippee Hot Shot. Alternatively, you can use distilled white vinegar or a descaling solution that is suitable for use with coffee machines. Begin the cleaning cycle by pressing the cleaning button on the side of the unit for two seconds. The cleaning light will illuminate on the front of the unit and hot water will now dispense into the container (do not leave it un-attended at any time). Once the water hopper is empty, the unit will beep and the water light will again illuminate.Limescale can build up in the machine over time, and this can affect the quality of the water used to make the formula. Descaling removes the limescale and other mineral deposits that can accumulate in the machine, ensuring that the water is clean and clear. Before you begin the descaling process, make sure you have all the necessary supplies. You will need: Another warning sign that your Perfect Prep Machine needs descaling is the descaling light. This light will come on when the machine is due for descaling. When this light comes on, it is essential to follow the manufacturer’s instructions to descale the machine properly. Green Light Press the descale button for 2 seconds and the system will run a descale process. During the descale process the red descale light will continue to flash. Regularly cleaning the machine with a damp cloth and mild detergent will help to keep it hygienic and free from bacteria.