The TS310 is equipped with a 10-inch woofer alongside a 1.4-inch tweeter that both work in perfect synch to deliver a smooth sound with a frequency response that ranges from 54 Hz all the way to 20 kHz and can reach a maximum sound pressure level of 129dB. This speaker is driven by a 2000w Class D amplifier while brand new transducers provide you with the cleanest possible sound. Thanks to the intelligent, super-robust design this speaker can be used as either a main front of house speaker or as an on-stage monitor. The high-efficiency class D amplifiers benefit from a passive cooling design which means they don’t use a fan so the speakers run quieter and have a longer lifespan. Also, thanks to the Alto TS310’s cabinet design, you can use it as a fantastic wedge monitor. Explosive Power, Versatility and Portability As is usual for this type of speaker, the TX310 is a ported, bi‑amplified two‑way system, in this case pairing its long‑excursion woofer with a 1.5‑inch voice coil alongside a one‑inch titanium compression driver tweeter, crossing over at 2.5kHz. The tweeter is loaded by a full‑width horn, producing a horizontal dispersion of 90 degrees and a vertical dispersion of 60 degrees.

The rear of the speaker features an integrated 2-channel mixer with two combo XLR/¼-inch inputs; each input comes with a volume control so you can go directly from your audio source into the system with no hassle. There is also an XLR link output for linking multiple units together and an IEC power input alongside a ground-lift switch and a contour switch that allows you to apply a small amount of equalisation if needs be. To prevent the speaker from overloading this speaker is equipped with a transducer overdrive protector that stops you from overloading the system when your signal is too loud, it also works to eliminate distortion at high volumes, and you can see when the speaker has overloaded thanks to a clip limiter LED.Thanks to the lightweight and rugged design, the Alto TS310 is easy to transport and set up. The high-efficiency class D amps with passive cooling design ensure the speaker runs cleaner, quieter and has better long-term reliability. The Alto TS310 offers flexible mounting/placement application allowing it to be attached to poles, walls and ceilings. The TS310 is the ideal loudspeaker for users looking for a powerful, reliable PA speaker without the big investment. There are a couple of things about the Alto TS310 that a lot of customers love. First, it is capable of producing loud and clear sound, courtesy of its powerful amplifier. What’s more, many people agree that the bass is deep and punchy. Second, the TS310 carries a price tag that’s reasonable enough. However, some consumers note that the cabinet seems to be insubstantial as it tends to rattle especially when there’s a lot of bass. The Bottom Line Experts and consumers alike consider the TS310 by Alto Professional as a small but terrible speaker. That’s because it is compact in size but big in performance, surpassing the capabilities of some larger speakers in the market. Let’s take a look at some of the key features of the product:

Full-bodied and powerful low-end is produced by the 10” LF driver working together with a 2.5” high-temperature voice coil. Using the contour EQ switch you can get the perfect sound to suit your tastes while the ground-lift switch allows you to remove the buzz and hum interference from other devices and the venue’s electronics. Easily Portable with Versatile Setup Options Integrated 2-channel mixer with dual XLR 1/4'' combo mic/line inputs, independent level controls, XLR link output, contour EQ switch and ground-lift switch Combining powerful, fantastic audio quality with an elegant and lightweight yet rugged and versatile cabinet along with a useful, intuitive user interface - designed and tuned in the USA; the Alto TS310 active speaker impresses on all fronts. A useful XLR Link output allows for setup expansion so you can add speakers and customise to your preferences and requirements.It’s evident that the Alto TS310 is designed by its manufacturer with professionals in mind. Also, it’s quite clear that the speaker is meant to be used at larger venues and with bigger crowds. Because it can be mounted on a pole, obtaining the setup best suited for the event is made easy.

Integrated 2-channel mixer with dual XLR 1⁄4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m) Frequency Response: 54–20 kHz (+/- 3 dB) The Alto Truesonic TS310 is a 2000-watt 2-way powered loudspeaker that delivers high end, professional audio. High End Professional Performance This cookie stores user-like settings for the chat system provider, which are required for our online chat service. Trusted ShopsEnclosure Construction: Trapezoidal, injection-moulded polypropylene enclosure, with perforated steel grille The cabinet design has a high quality, solid build and is lightweight so it’s easy to carry, transport, set up and install. With 1,000 watts of continuous (2,000W peak) Class-D amplification, this 2-way, full-range powered loudspeaker features redesigned transducers in a lightweight, portable enclosure. The TS310 delivers uncompromising professional audio for a wide variety of applications, including mobile performing and permanent installations. This active cabinet's tight, low-frequency reproduction is handled by a 10" driver with a 2.5" high-temperature voice coil. A 1.4" tweeter with a neodymium magnet and precision waveguide provide crystal-clear high-frequency reproduction.

Power comes from Class‑D amplifiers rated at 350 Watts peak or 175 Watts continuous, and the overall system has a specified frequency response of 75Hz to 20kHz at the ‑3dB points. Protection is provided by a built‑in analogue limiter and additional thermal overload protection circuitry. Two LEDs indicate power and the presence of signal/clipping, while a rotary control adjusts the input gain, which offers enough range to cater to both line‑level and mic‑level sources. There’s also a power LED on the front panel. The maximum SPL for a single speaker is specified as 117dB at a distance of one metre, which although not massive, should be adequate for many types of small venue applications including solo artists, duos and bands without loud drum kits. The speakers are suitable for both vocals and instruments such as guitar, though you’d need the larger models and/or an additional subwoofer if planning to put bass or drums through the PA. With a little mixer EQ you can get a very workable vocal sound out of these speakers, and a pair will provide adequate volume for smaller venues... The Alto TS310 combines truly high-performance audio with elegant style and flexible placement/mounting applications. The new 1.4-inch HF driver with precision wave guide delivers clean and smooth high frequencies, while the 10-inch LF driver with high-temperature voice coil provides the deep, body shaking bass. This is all powered by the custom engineered high-efficiency class D amplifiers with passive cooling design. This design means that there is no fan so the speaker will run much cleaner, quieter, and has greater long-term reliability. Flexible Mounting/Placement Application The Alto TS310 is also intended for those who refuse to be weighed down by bulky and hefty audio equipment when going from one venue to the next. The powerful 10-inch driver of the speaker is housed inside a compact cabinet that can be transported trouble-free as it weighs just a little over 30 pounds. What Customers are Saying

Features

Because of the TS310’s key features mentioned above, it’s really easy to love the speaker by Alto Professional. The following are some other things that we like about it: We needed lighter weight performance speakers, and that's what we got! Shame they came with euro plugs and I had to buy UK leads to make them work. An all-new series from Alto Professional, TS3 loudspeakers provide incredible audio with an intuitive user interface and versatile mounting and placement options.