This product is non-DIY goods, 4 floor below the floor fee, 5 floor above each additional 200 yuan, no recovery services.

The second type is the hand-operated edge bander which comes with a clamping system and all other features like feed belts, trimming knives, etc. This can be used to complete a variety of woodworking projects and is quite affordable compared to other types of tools available in the market today. The third type is an automatic bander with feeders, rollers, etc., just like any stationary machine that automatically does everything for you without any manual intervention. Easy On/Off Switch: the feeder on/off switch is located on top of the primary handle allowing for immediate control of the tool’s operation. The YuchengTech woodworking edge bander is an ideal product for the furniture industry. The edge banding machine can be used to create a variety of decorative edging on your furniture pieces, including PVC abs, thin wood chips, etc. The machine is widely used in the production of different types of edges, including straight-line edges and curve edges. This machine is easy to use and comes with a built-in LED display screen that shows you all the necessary information. Whether you’re working with veneered wood panels, softwood, hardwood or other materials, you’ll need to give them a proper finish by planing the edges with a wooden strip through adhesives. An edgebanders will make short work of your edge banding needs. This edge banding machine will ensure a high-quality finished product, with no bubbles or creases in the edge banding.When considering edge banding, sanding can definitely be beneficial and is usually recommended, but depending on the situation is not always necessary. If your project has a flat and smooth surface, then edge banding without sanding should work just fine – it all depends on the comparative level of smoothness of both the substrate and edging material. 9. Is edge banding necessary? With an array of edgebanders that each has different methods of reaching the same goal, the following list gives a brief overview of the different types of edgebanders: The Festool Hand Held Edge Bander Conturo is a lightweight, compact edge bander that can be used to create perfect edges on the side of your cabinets. The unique design lets you cut cleanly and precisely with no distortion or damage to adjacent surfaces. This tool is great for creating smooth transitions between hardwood floors and cabinetry. It’s also handy for making doors look like they were made by hand! Tape Insert Guide: a measured guide in increments of 1mm determines the width of the edge band or edging tape and secures it in place for a regulated feed. The speed of the machine is also an important factor to consider. A faster machine can help you complete your work faster, but it may also require more attention and precision to ensure the quality of the finished product. Consider your experience and skill when selecting a machine with a suitable speed. 3. Quality of the finished product:

The G0825 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The CBC.E not only does not require constant maintenance but by saving you time, you can get more jobs which brings in more money for you. The edge banding machine contains some cutter and trimmer inside of it. The worker inserts a piece of plywood or any kind of sheet into the edge bander, and it will apply edge banding tape to the edges and trim them nicely to give a perfect finish to the look of your woodwork. Small in size - about 40cm long for a weight of approx. 2.5kg - and equipped with a reel for the veneer strip (wood, PVC, polyester or melamine). These banders are used by following along the edge to be banded - push, keeping the tool firmly against the edge of the panel. The pre-bonded strip is heated and unwound as the device moves along. The tape can be cut manually when the edge is complete. These banders may come with additional guide, flush or incline systems. They're comfortable to use and allow work on curved surfaces. Maximum strip width is around 60mm. Stationary edge banderThe Le-Matic BR500 edgebander is advanced yet simple to use. The machine has a number of ergonomic and intuitive controls including two rubber grips for precise control and a metal support plate designed to rest on the workpiece allowing for strain-free use. The feeder on/off switch is located on top of the primary handle allowing for immediate control of the tool’s operation. A measured guide in increments of 1mm determines the width of the edge band or edging tape and secures it in place for a regulated feed. The glue pot handle has two positions in case of workpiece interference and an easy-to-reach knob regulates the flow of glue amount resulting in a mess-free, consistent result. The digital temperature control system has two modes: mode one gives a range from 80°-155°C, mode two 120°-200°C. This allows a huge range of specialist glues to be used for many applications. A variable speed range of 2-6m/min gives an edge to the control of this edgebander in difficult situations. The speed control is conveniently located in the top of the control handle, making speed adjustment easy. Laser – these involve the use of laser beams that melt the surface of the material in preparation to be glued. Once complete, the material is immediately pressed onto the workpiece. It features two-stage temperature control, which enables you to choose the optimum temperature setting for the type of material being worked with.

Edgebanders are the perfect solution to the harsh and unsightly edges of your sheet goods . These untreated edges aren’t just an eyesore, they make for difficult handling of the sheet and can easily cause scrapes and splinters. With the ability to process different types of wood and a variety of materials (including plyboard, polyester, Formica and melamine), edgebanders will provide a significant boost to the durability of your processed materials whilst transforming the appearance from careless and rugged to neat, tidy and of much greater quality. How Do Edgebanders Work? Festool Edge Bander is capable of edging straight surfaces, curves, radii, convex and concave shapes, as well as internal corners. The stationary unit can be used for finishing beveled edges to an outstanding quality. The CONTURO Edge Bander is equipped with a side-mounted clamping system that allows you to position the tool close to the workpiece without any problems. A particularly useful feature: the tool can be set up in no time at all and does not require any setup tools or accessories.The first factor to consider when choosing an edge banding machine is its capacity. You must ensure that the machine you choose can handle the size of the pieces you work with. If you work with large pieces, then you need a machine with a larger capacity. 2. Speed: Glue-Free Edgebands: by not requiring edgebands or edging tape with pre-applied glue, our portable edgebanders help reduce your costs. An edge bander machine is a very helpful tool that can be used in the construction and building industry. It’s called an edge banding machine because it has many different types of features which are useful for putting on edges. This means you don’t need to add any extra pieces or materials, so they roll over their own self-adhesive material to the edge of a solid wood surface. This way, you can easily cover up any exposed or unfinished edges and make them look finished and professional in both appearance and quality as well. 3. What Do Edge Banders Do?

Save money on your edgebands. By not requiring edgebands or edging tape with pre-applied glue, our portable edgebanders help reduce your costs. What kind of durability can you expect from the edge bander machine that you choose? It’s important to get a well-made and durable machine because if you buy one that breaks down after only a few uses, it won’t be worth your money. A portable edgebander is used for applying veneers to straight or curved panel edges in PVC, ABS, laminated and solid woods. The Co-Matic BR500 edgebander is an advanced but simple to use machine and has many patented features not found on any other portable edgebander. The glue is applied directly onto the edgeband or edging tape. Maintain steady pressure on the workpiece against the feeding roller to apply the edgeband or edging tape at desired temperature.Some edge bander machine contains all the parts like band feeder, handle, cutter, trimmer, sander, and so on. Other machines do not contain all of these features. So you should choose the one that contains all of these features or not.