Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Use to add solid colour to epoxy laminating resin, epoxy gelcoat, epoxy electrical potting resin and epoxy casting resin. A pigment ratio of 5-10% should be sufficient to add solid opaque colour in most applications. When a dispersion is then added to the bulk of the epoxy it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps). Mix resin for 1 minute before adding hardener. Add hardener to resin pail and mix thoroughly for 4 to 5 minutes. For less than full kit mixing, a 2:1 by volume (3.1:1 by weight) mix ratio must be used. Always use hand and eye protection when working with or near epoxies. Application

White Epoxy Pigment Paste - Easy Composites

PRO (A-component) Attention: reaction product: bis- [4- (2,3-epoxypropoxi) phenyl] propane oxirane, mono [(C12-14-alkyloxy) methyl] derivative You don't have permission to access "http://www.homedepot.com/b/Paint-Paint-Supplies-Epoxy-Epoxy-Adhesives/White/N-5yc1vZ2fkoqdbZ1z1aj98" on this server.Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye, If the lid of the container is closed directly after opening, the shelf life after opening is at least 6 months. Mapei Kerapoxy White is a 2 part epoxy grout that is perfect for use in kitchens, bathrooms and outside areas. Perfect for grouting in and around swimming pools, wet areas and patio areas. Pigment dispersions (pastes) should always be used when pigmenting epoxy rather than pigment powder because the rigorous milling and mixing process during manufacture ensures that the tiny pigment particles are fully dispersed into a small amount of carrier epoxy, getting the very most from their colour.

UniBond Repair Express Epoxy Putty White 2-part adhesive 60g

Sometimes certain areas will require what we call ‘high performance’ grouts, which is where this grout comes in. If you are tiling an area which receives above average foot traffic or is cleaned more often than usual, you will need an epoxy grout to cope with this. Pour the the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product may boil in the mixing cup depending on the system and the amount of substance. ECO (B-component) Danger: Reaction product: 3-aminomethyl-3,5,5-trimethylcyclohexylamine and 4,4′-isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane m-phenylenebis (methylamine) salicylic acid. No epoxy resin is completely UV stabilised. However, high-quality raw materials and additives such as UV absorbers can increase UV protection. By using a top coat, you can increase UV stabilisation even further. Possible top coats are e.g. transparent polyurethane (PU) resins or lacquers which are painted or sprayed onto the epoxy coating as a finish.

The heat deflection temperature indicates up to which temperature the cured epoxy resin system remains mechanically stable. At higher temperatures, the cured epoxy can soften. By annealing (curing at higher temperatures >60°C), the heat resistance can be increased.