COMFORTABLY FITS UP TO 7 PEOPLE: The Lay-Z-Spa Santorini HydroJet Pro™ is spacious enough to comfortably seat 5-7 people, making it perfect for enjoying a spa session with all of your family and friends Second step: if the set temperature is 40℃ (104ºF), the difference between actual temperature and set temperature is 22℃ (71ºF). Since the temperature increase per hour is 2℃ (35ºF), you need to start heating the water 11 hours before using it. pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation. The included Freeze Shield™ automatic heating function prevents inner components from freezing during colder temperatures. Designed with innovative winterizing technology, the system will keep the internal temperatures between 6º and 10ºC (42º and 50ºF) to prevent damage.

Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it.

Shop Online

For low TA levels below 80ppm you will need to use Total Alkalinity Increaser. The amount of TA + you need to add to your hot tub depends on the volume of water and how low your readings are. As a guide - a hot tub of 1,000 litres requires 18g to raise Total Alkalinity levels by 10ppm (parts per million). The amount of pH increaser or decreaser you need to add to your hot tub depends on the volume of water and how low your readings are. Refer to the dosage information will be printed on the individual chemical bottles. So, whilst you will notice your energy costs rise when running your new Lay Z Spa, it will be more cost-effective than other popular inflatables! If there is not air coming out from the connection pipes this means there is an issue with the pump. Please follow these steps to resolve the issue: Because pH measures how acidic or alkaline your water is, it is important to make sure your hot tub ph Levels are always balanced between 7.2 and 7.6 to avoid impacting your Lay-Z-Spa and your spa experience.

Then there are the maintenance costs, the cost of pool chemicals and inflatable spa filters, which will need to be replaced more frequently depending on how many people, so the amount you use your Lay Z Spa in a week has a massive impact on your running costs. Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine. Your first round of deep clean tablets to ensure you get rid of any pesky bacteria after its first outing. Using this function, you can choose how long you’d like your system to run and when you’d like it to turn on, all without having to readjust the settings throughout the day manually.Clearwater pH Plus , also known as ‘pH increaser’ is the best way to increase pH levels that have dropped below the recommended level. To avoid skin discomforts and enable the chlorine in your spa to work effectively, it’s vital that acidity is monitored and controlled. The recommended pH balance of spa water is between 7.2 and 7.6. Basically, cold air and chilly temperatures mean it takes longer to warm up your Lay Z Spa, and you’ll need to engage the heating cycle more often to maintain a toasty hot tub, whilst in the summer months, it’ll cost far less to keep Lay Z Spas warm or you can place a lid on in the winter to retain heat! How many times have you used your Lay Z Spa Not to mention that their Duraplus insulation is 18% more energy efficient in terms of heat retention than a regular hot tub! Fifth step: when the desired time is set, push the power saving button again. The LED waiting time will light up steadily and the function will start when the function is activated. After setting, the screen will flash the current temperature and time alternately.