Thomas Regional® are part of Thomasnet.com. Thomasnet Is A Registered Trademark Of Thomas Publishing L-Shaped Hex Keys: L Shaped Hex Keys or L Keys are the most common type of hex key with a hexagonal tip at each end Air Compressor Filters Accessories & Consumables Air Tools and Accessories Oils & Lubricants Low Noise Compressors

Draper 16mm Metric Hexagon Key - The Range Draper 16mm Metric Hexagon Key - The Range

Pressure points – the hex design of the Allen™ screw distributes force from the tool against 6 surfaces compared with 4 for the Phillips head screw and 2 for the slotted screw. This makes it easier to loosen or tighten these fasteners and can make it less likely to strip or damage a fastener while loosening or tightening. If you just want a no-nonsense mountain bike at an attractive price point, the Canyon Neuron AL 6 is a very good answer. Non-sparking designs – While most Allen™ keys use an alloy steel or tool steel material in their fabrication, there are options available that utilize Beryllium Copper in lieu of steel. The Beryllium Copper material will not create sparks if the tool accidentally slips and strikes another metal surface. The non-sparking feature of this material makes these types of Allen™ wrenches suitable for use in applications where the presence of flammable gases or combustible liquids might exist. High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885.Figure 1 below shows the cross-sectional profile of the Allen™ wrench or Allen™ key. The important parameter that establishes the size of the Allen™ wrench or Allen™ key is the width across flats, which is the distance between any two of the faces of the tool that are parallel to each other. Hex keys or Allen keys are available in metric sizes and imperial sizes Imperial Allen Keys. They are also available in Allen Key Sets which include a range of popular hex key sizes including 12mm Allen keys. RS also supply Allen keys from leading brands such as Wera Allen Keys, Wera Allen Key Sets and Bondhus Allen Keys

Allen Hex Keys | RS

Rumours that Red Bull Hardline will become a series have been roaming the internet corridors a while, so it's perhaps no surprise to have the official news: Hardline will have...

Back in stock alert

Allen™ wrenches or Allen™ keys are generally available in several different styles or types. The most common Allen™ wrench type is the one mentioned earlier – the L-shaped hex key – but there are other variations that incorporate different handle designs, utilize different materials, or add special features. A summary of the most common Allen™ wrench types is found below: Tether-ready designs – These Allen™ wrenches include an opening on the handle which can be used to attach a tether that can secure the wrench to the user or to a fixed object such as a scaffold. This feature helps prevent the wrench from accidentally falling into a work area and causing injuries or equipment damage. This feature is useful when the tool user is working on an elevated platform. This article provided a summary of the commonly available sizes of Allen™ wrenches/keys and explained the different types of Allen™ wrenches as well as the advantages of these tools. For information on other topics, consult our additional guides or visit the Thomas Supplier Discovery Platform where you can locate potential sources of supply for over 70,000 different product and service categories, including suppliers of Allen™ wrenches and other hex key wrenches. Electric Heater Accessories Gas Cylinder Storage Gas Heater Accessories Propane/Butane Hoses and Regulators Range of access – Allen™ wrenches that feature a hex ball end can allow fasteners to be accessed from angles other than directly in the same plane as the fastener. This can simplify assembly & disassembly in close quarter conditions.