Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously

Zigbee: up to 6dBm transmit power and -96dBm receive sensitivity Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.3dBi Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max)Ultra Tri-Band (UTB) enables ultimate flexibility in 5GHz and 6GHz channel selection without performance degradation Operating the AP with an 802.3af (class 3 or lower) POE source is not supported (except for AP staging; no radios will be enabled). In the Health Status graph, the Poor Health Limit text indicates the poor health limit of the device in the network.

Four spatial stream Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 Wi-Fi 6 client device (max)

Get trained and certified with Aruba Professional Services

Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain. Four integrated dual-band downtilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.2dBi in 2.4GHz and 7.5dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.

radio: Four spatial streams MIMO for up to 1,147Mbps wireless data rate with HE40 802.11ax client devices When PoE power is supplied to both Ethernet ports, the AP can be configured to combine or prioritize power sources Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz. Two vertically polarized dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.3dBi (2.4GHz) and 5.9dBi (5GHz) per antenna.Power over Ethernet (PoE): Make installation easy! You can mount a WiFi Access Point with PoE anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Throughput—Provides a graphical representation of the WAN throughput for an AP. The graph displays the WAN transmit and receive performance in bps. Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 4.5dBi

Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 client devices) and up to 300Mbps in the 2.4GHz band (with 2SS/HT40 clients) Regulatory compliance (for more country-specific regulatory information and approvals, please see your Aruba representative): In the Health Status graph, the Channel Utilization (Radio 3) data is available if the tri-radio mode is enabled or if 6 GHz radio is available. For more information, see Access Points in Tri-Radio Mode.Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 4.3dBi in 2.4GHz and 5.6dBi in 5GHz. The 303 Series AP is a unified AP that supports both controller-based and controller-less deployment modes, providing maximum flexibility.