Then the sheathing has to be pushed OVER the tube and finally the black clip has to slide over the sheathing and matched up into the 3 small protrusions in the brass casting. Finally the bottom brass cap which was unscrewed at the beginning of these instructions must be replaced.

If you need advice or support for your product, please in the first instance contact the support provider using the number on this support page. I even offered to send back the defective hose to prove that I actually bought one and they wouldn’t accept that.The first 30 feet of the hose expanded as advertized, then there was a blowout and the water poured out of the side of the hose.

The trigger lock is a ring on the top of the handle and needs two hands to flick into place, which is not ideal and the adjustable flow is a fiddly little switch that takes ages to wind up or down, making it fairly ineffectual. It isn’t cost effective enough to send them back for repair, and we’ve actually been able to repair them so long as it’s the connectors that fail, or shorten them if the length of the leak in the hose itself is close enough to one of the ends to be worthwhile.

If you’re just a hobby gardener or weekend yard waterer you might not use it as much as you’re hoping to.