I get asked a lot how it compares to the well known Bosch Go electric screwdriver as I have also used this in the past.

This one’s great for bigger projects: it’s versatile, it’s got plenty of welly and it comes with an 81-piece set of bits that should cover just about everything you would need. With a respected brand like Makita, you know you’re not getting poor-quality accessories. It’s a little large for some smaller jobs, though, and a little too fierce for jobs that need finesse, such as PC builds or appliance repairs. When you’re up to something major, though, this is a top tool for the job. With the larger drill/driver models, you will usually need to remove the battery and slot it into a separate charger. That said, even some of these are now charging through micro-USB. Key specs – Power: 4V; Speeds: 1; Max speeds: 230rpm; Max torque: 3Nm; Battery: 1,500mAh lithium-ion; Charger: Proprietary 4.2V; Accessories: 6 bits, removable screw holder; Weight: 500g

Screwdriving Bits

The 1\4 inch shank collet takes any 1/4” shank bit including the longer Japanese style which is comes with.

A cordless screwdriver’s clutch settings refer to the different options for the amount of pressure, or torque, that it provides to screw or unscrew. If you use too much pressure, you can strip a screw’s head or snap it off entirely, so adjustability is important. The more clutch settings that a model offers, the more control you’ll have over the clutch for each project that you undertake, which allows you to work with even the smallest or most fragile screws. The other main difference is the power and torque. The Bosch gets to 0 – 360 rpm and has an adjustable torque setting which ranges from 0.2 - 5 Nm. For the majority of the work I used this tool for I found that I had the torque setting to low. Anything higher and I was just using my m12 impact drill. A pistol-style cordless screwdriver resembles a cordless drill, though they are usually lighter, more compact, and don’t offer the same power. They have a handle that you grip, while the screwdriver section with the bit sits perpendicular. Pistol-style cordless screwdrivers are usually easier and more comfortable to hold than straight models, but they don’t fit as well in tight spaces. https://addictedtotools.com/collections/tools/products/vessel-usb-charge-ball-grip-electric-driver-3-speed-torque-model-220usb-p1 However, the WX240 really comes into its own if you’re working in cramped spaces, or doing fiddly jobs where a larger cordless driver with more of a pistol grip might get in the way. I used both the WX240 and the Bosch IXO to assemble a PC inside a new case, and while the Bosch was fine for removing external case screws, the Worx was a lot more usable inside the case and for getting screws into the motherboard. It charges in under 90 minutes over a USB-C cable, and will happily last for around 35 to 45 minutes of work. For bigger screws on DIY jobs, you might want something with a little more power and torque; but if you need something that feels and works more like a manual screwdriver, this is the one to buy.Some lower-end models actually use alkaline batteries, which don’t less as long and may not provide the same power as those with lithium-ion batteries. You’ll also have to buy replacements to make sure the device always has power. Extra features

Available in these models: Original Model, Silver Edition, Gold Edition, Limited Edition Dull Green Hey guys! We’ve had quite a lot of questions asking us about the best USB screwdriver to buy, so to make it easier we’ve broken it down into 3 categories: The main application of the Vessel P1 driver for myself is terminal screws, light and switch board screws (the driver is not 1000v rated) and other smaller job uses. Most of the models with built-in batteries charge from a standard wall charger, or even in many cases via a micro-USB port. This is convenient if you’re travelling around and also means you can keep using your screwdriver even if you lose the charger supplied. A few still use some form of charging cradle, where the tool slots into place. These differences did add up to myself as the vessel is a lot lighter and fit better both in my hand and in my pouch.

Contact us

A cordless screwdriver’s most important feature is its voltage, which determines how powerful the tool is. A cordless screwdriver’s speed rating indicates how many times the tool rotates per minute (rpm). You’ll get the most control if you buy a model with variable speed, control because you can adjust the speed based on the screw material. Choose a model that offers at last two speeds:

A. Choosing a weight for a cordless screwdriver is mainly a matter of personal preference. There are models that weigh less than a quarter of a kilogram, and others that weigh over two kilograms. Many people find lighter tools easier to handle, but it’s important to remember that lightweight models typically have smaller batteries. That means they don’t offer the same battery life as heavier models, so you’ll likely have to recharge them more often. For basic, light- to medium-effort projects, a screwdriver that offers approximately 4V is usually sufficient. Not all lithium-ion batteries are alike: some will hold a charge better than others, while some will also charge faster, within two or three hours. Accessories Because screwing often involves working in tight spaces, you may want to choose a cordless screwdriver with a built-in LED light at the end. It illuminates your work area, so you can see what you’re doing more easily. Cordless screwdriver pricesAs with most drill-drivers, the battery is a separate unit that slides onto the bottom of the handle. It’s charged by its own charger and can take up to six hours to charge. This and the sheer size means it’s not as convenient a tool for basic household DIY, but it’s a brilliant and affordable option when you have something more ambitious in mind. A. If you want a cordless screwdriver that’s comfortable to use, it’s important to choose a model with a soft rubber grip handle. It fits the contours of your hand, so it’s usually easier to hold. A cordless screwdriver with an adjustable handle can also make using the tool easier because you can choose a straight or pistol grip, depending on which option is most comfortable for the project that you’re working on. I do think it is a middle step tool between using your normal screwdriver and a 12v drill which I usually use. Ive found it extremely handy for those awkward jobs when trying to tighten lighting terminals or put a light shroud on while holding the fitting up with the other hand. Because its light and compact it fits into those hard to reach spots.