Broadly speaking, wood preservation can be defined as all the measures taken to ensure the longevity of wood. However, when we talk about wood preservative products, these are chemical preservatives and processes (also known as timber treatments, pressure treatments or lumber treatments) which aim to increase the durability of wood, wooden structures or engineered wood, by extending the life of outdoor wood products up to 10 times the life of untreated lumber, while also protecting the material from timber’s three main enemies – fungi, termites and wood-boring insects. What are Sika’s Sikagard wood preservatives? H410 Very toxic to aquatic life with long lasting effects.EUH 208 Contains. May produce an allergic reaction. When you are finished using a compression tool like a nail gun, make sure that the pressure is released before you break the hose connections. Power tools can sell for a decent price, which has opened up the doors to cheap and fake tools coming onto the market to maximise profit. The issues we have with such tools are that they may not provide the power needed to complete the job given. Also, many of them are made with flimsy materials that could fall apart easily with the vibrations of usage. The best-case scenario is that the tool will stop working, but in the worst case, they can explode, burst into flame or shatter over the user.

The wood preservative chemical products currently available on the market fall into these types: water-borne preservatives, oil-borne preservatives and Chromate Copper Arsenate (CCA). Each of these types has its unique benefits – water-borne preservatives, for instance, are the cheapest wood preservative option widely accessible on the market, while CCA is a time-tested pesticide ideal for protecting wood against fungi, termites and other pests which might be a threat to wood products. Oil-borne wood preservatives, on the other hand, have historically been a popular choice for treating outdoor structures (e.g. bridges and railroad tiles) to prevent rot or as a disinfectant and pesticide. What are the advantages of using Sika wood preservatives? SIKAGARD WOOD PRESERVER is a low solvent, low odour solution based on Micro-fine active technology. The fungicides and algaecides present in these formulations are finely dispersed so that wood penetration and hence effectiveness is much greater than standard wood preservation products. In addition the use of ultra light fast pigments on the coloured variants give an even fade resistant finish which will last for years. SIKAGARD® WOOD PRESERVER is fast drying and non flammable; and application to wet timbers is possible without loss of performance. It is specifically designed to deeply penetrate all wood and joinery to give long lasting protection from damage caused by wet rot, dry rot, decay and fungi. Sikagard Universal 5 Star Wood Treatment Do not use electric tools in wet conditions unless they are approved for that use. If you must work in wet conditions, always ensure you have good balance and are unlikely to slip.You may have to pay more than the cheaper or disposable options on the market, but you will be thankful if a near miss or accident occurs and it was your PPE that reduced or avoided the injury. Work Boots Can be used internally or externally and on most timber and joinery such as fences, sheds, doors, window frames, roof timbers, floorboards and joists Covers approx Always read the label and follow the instructions provided

Many bargain footwear suppliers offer work boots for a fantastic price. But these are often not steel toe capped, do not have anti-fatigue soles and won’t protect your feet against liquids or extreme heat. In fact, some boots that look the part may as well be a pair of sandals if a hammer or power tool was to drop on your foot.When in control of a hand or power tool, it is your responsibility to do everything in your power to keep you and the environment safe. That means wearing visors, gloves, goggles with anti-fogging coatings, vented respirators, face masks made of premium cushion materials and ear muffs with soft ear cups. Cheap drill bits do not cut well when they are brand new and don’t cut cleanly either. It will make the job slower and more difficult. It can be challenging to identify if a cheap drill bit is doing a good job because they can work great on lighter materials. Once you go to use it on the heavier stuff, however, you will run into an array of issues that will frustrate you. PPE (Personal Protective Equipment) Can be used internally or externally and on most timber and joinery such as fences, sheds, doors, window frames, roof timbers, floorboards and joists HSE 8786 Not only is preservative treated wood economical for the environment, it is also economical for your construction budget – instead of spending a lot on substitute materials like aluminium, concrete and steel, which cost more due to manufacturing requirements, import fees and environmental protection costs, you’d be saving a great deal by investing in Sika’s wood preservatives. Cheaper brands, such as those you would find in high street bargain stores, will have been mass-produced with lower grade materials which allow the low price tag. Though that may sound good for your bank account, you will soon discover you have a tape measure that slices your fingers, screwdrivers that don’t fit in the cross slot of a screw and a hammer grip that is slipping from the handle.

As with any product, when you’re shopping online you’re often given a set of alternative products to consider. These aren’t always the same type of product, but usually products that people are interested in when they’ve bought Sika Wood Preserver Clear 5Ltr. Handle pesticides safely Low odour 3-4m/Ltr Micro emulsion technology provides deep and even penetration 3-4m/Ltr HSE No Contains Propiconazole 1 litre 1L covers up to 5sq m with 2 coats Specifications: Contains propiconazole Handle pesticides safely Suitable for the treatment of cut end grain Covers approx technology with added fungicides, algaecides and Permethrin to actively kill and protect against all preservation needs in the one can. It is a low solvent; low odour solution based on Micro-fine active When applying the product to joinery or floorboards, use 1 litre of Sikagard Wood Preserver per 3 – 4m² of surface. You’ll need to apply between 2 – 3 coats of the solution, with at least 2 hours of drying time being each application.

Having tools with excellent durability is extremely important. Not only will it mean you will not have to spend out on replacement tools when they break prematurely, but because tougher tools will do a better job. Sometimes cheaper ones can appear to work great until wear and damage suddenly make them unusable, and you are left unable to complete your task. This will lead to an extended work period as you will have to go out and buy a replacement. If you use that tool as part of your profession, it could mean the difference between hitting your deadline or not. No matter what kind of job you have or how you’re using the equipment, make sure your tools can stand up to the task in the first place. First of all, many well-known brand names tend to boast about their flagship tools in television, trade magazines and online ads. They tend to make the harder jobs look extremely simple when using their specific brand. Of course, the basis of this is to help sell their product. So is this a realistic representation of what the tool can do for you, especially if you’re just starting out? The answer is no. Different skill levels and experience has a significant factor in the effectiveness of a tool, as well as other things. It gives deep penetrating protection to sound wood against decay, mould and blue- staining fungi Features: Can be Painted; Stained or Varnished Over; Rapid-Drying; Covers Approx 3-4m/Ltr Covers approx Specifications: Always read the label Contains propiconazole 4m/Ltr Keep out of reach of children and pets